Linear Scales

Linear scales are used to obtain accurate measurement of distance, mass and volume. A wide variety of measuring ranges are available.

Linear scales offer
● Sturdy construction
● High resistance to vibration
● Protection rating are similar in upright and reclining position

● Linear scales are highly resistant to environmental disturbances. Electromagnetic induction principle means scales are unaffected by contamination. Suitable for milling machines, drilling machines, XY tables etc.

Features include
● Enhanced vibration-resistance and durability
● The innovative rubber lips keep out contaminants when you are using the scale in a machine shop
● An armoured signal cable is used to connect the scale unit to the DRO counter, so you can operate it safely even in hostile environments
● The signal cable outlet can be positioned on either side of the slider so you can connect the signal cable from either direction

The Linear Scale System has superior ease-of-use and is reliable, both of which are features that can dramatically improve machining accuracy and efficiency.

...
Read more Read less

Filters

Viewing 1 - 4 of 4 products
Results per page
Description Price Accuracy Cable Length IP Rating Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 795-9912
Mfr. Part No.539-802
BrandMitutoyo
MYR2,054.40
Each
units
±5 μm 3.5m IP67 +45°C 0°C
RS Stock No. 795-9943
Mfr. Part No.539-809
BrandMitutoyo
MYR2,131.30
Each
units
±5 μm 3.5m IP67 +45°C 0°C
RS Stock No. 795-9930
Mfr. Part No.539-807
BrandMitutoyo
MYR2,417.17
Each
units
±5 μm 3.5m IP67 +45°C 0°C
RS Stock No. 795-9924
Mfr. Part No.539-804
BrandMitutoyo
MYR2,124.97
Each
units
±5 μm 3.5m IP67 +45°C 0°C
Related Products
Vernier Caliper with hardened Stainless Steel frame and ...
Description:
Vernier Caliper with hardened Stainless Steel frame and jaws for extremely accurate outside, inside, step and depth measurements. Dual scale with both metric and imperial readingsManufactured from hardened steelFine adjustment mechanism with lockscrewsSuitable for general workshop and machine shop use. ...
A dial caliper manufactured from hardened stainless steelThe ...
Description:
A dial caliper manufactured from hardened stainless steelThe dial rotates for zero adjustment and can be locked in positionThe scale has 0.02mm division1 pointer revolution = 2mmA thumbwheel offers ease of operation, a knurled lockscrew locks jaws if required.
Callipers with round scale, made from fibreglass-reinforced polyamideMeasurement ...
Description:
Callipers with round scale, made from fibreglass-reinforced polyamideMeasurement range 0 → 150 mm with 0.1 mm divisionsShock-protected dial indicator ø 35 mm, adjustable to zero, one pointer revolution = 10 mmExterior, interior, depth and impact measurement.
Vernier Caliper with hardened Stainless Steel frame and ...
Description:
Vernier Caliper with hardened Stainless Steel frame and jaws for extremely accurate outside, inside, step and depth measurements. Dual scale with both metric and imperial readingsManufactured from hardened steelFine adjustment mechanism with lockscrewsSuitable for general workshop and machine shop use. ...