Feeler Gauges

A feeler gauge is a hand-held measuring tool used to measure the size of small gaps between two objects that are in close proximity. The tool has a number of folding metal strips (also known as blades or leaves) which are machined to specified thickness levels. They are usually made out of tempered tool steel or stainless steel and should be rust resistant.
Measurements are given in millimetres or inches and can be found on each individual strip. A feeler gauge fits into small gaps which can be less than 5.08mm and can take measurements as small as 0.02mm to 5.08mm.
The tool is ideal for use in spaces where other measuring devices such as a tape measure could not fit. They are flexible and easy to bend so they can fit into difficult positions.
Feeler gauges are mostly used in engineering to accurately measure the clearance between two parts to ensure that mechanical parts are in safe working order.
Parts of a feeler gauge:
● Case – either plastic or steel, and protects blades/leaves when tool is not in use, compact storage
● Locking device
● Leaves or blades – thin strips of metal with inscribed measurements on each referring to the thickness of the blade
What can feeler gauges measure?
Can be used for checking: tappet clearances, spark plug gaps, distributor points, bearing clearances and piston ring gaps.
Different types of feeler gauge:
● Go NoGo feel gauge – thick base and a thinner top, the thinner end is able to ’go’ into the gap and the thicker body will not ’no go’
● Straight lead feeler gauge – blades are consistently parallel
● Tapered feeler gauge – blades thin out towards the tip
● Double ended gauge
● Offset gauge – blades are bent towards the tip for easier access in most motor vehicle applications and work in restrictive areas
● Feeler strip – blades are not connected in a set and either end can be used to measure

...
Read more Read less

Filters

Viewing 41 - 52 of 52 products
Results per page
Description Price Number of Blades Imperial or Metric Blade Material Length Thickness Height Safe
RS Stock No. 181-8135
Mfr. Part No.09275
MYR18.24
Each (In a Pack of 5)
units
1 Metric - 305mm 0.75mm -
RS Stock No. 181-8117
Mfr. Part No.19260/19K5
MYR9.60
Each (In a Pack of 5)
units
1 Imperial - 12in 0.005in -
RS Stock No. 181-8127
Mfr. Part No.09215
MYR11.84
Each (In a Pack of 5)
units
1 Metric - 305mm 0.15mm -
RS Stock No. 181-8140
Mfr. Part No.09115
MYR147.20
Each
units
1 Metric - 7.6m 0.15mm -
RS Stock No. 181-8128
Mfr. Part No.09220
MYR11.84
Each (In a Pack of 5)
units
1 Metric - 305mm 0.2mm -
RS Stock No. 181-8118
Mfr. Part No.19595/19K20
MYR14.72
Each (In a Pack of 5)
units
1 Imperial - 12in 0.02in -
RS Stock No. 181-8136
Mfr. Part No.09300
MYR23.68
Each (In a Pack of 5)
units
1 Metric - 305mm 1mm -
RS Stock No. 188-3978
Mfr. Part No.804.AM
BrandFacom
MYR144.94
Each
units
19 Metric Brass 100 (Blade)mm - -
RS Stock No. 181-8141
Mfr. Part No.09120
MYR175.40
Each
units
1 Metric - 7.6m 0.2mm -
RS Stock No. 181-8134
Mfr. Part No.09250
MYR11.84
Each (In a Pack of 5)
units
1 Metric - 305mm 0.5mm -
RS Stock No. 572-173
Mfr. Part No.DY5110
BrandStarrett
MYR14.162
Each (In a Pack of 5)
units
1 Imperial Steel - 0.004in -
New
RS Stock No. 193-1655
Mfr. Part No.T3527M 413
BrandCK
MYR41.06
Each
units
13 Metric Steel 107mm - -
Related Products
Manufactured from high quality SteelSatin Chrome finishOffers a ...
Description:
Manufactured from high quality SteelSatin Chrome finishOffers a quick and accurate way of checking drill and rod sizesHoles marked in metric with Decimal equivalents.
• Manufactured to BS957.1969• Made of tempered steel ...
Description:
• Manufactured to BS957.1969• Made of tempered steel with smooth rounded ends, making them easier to work with• Punched 3//16 in hole for hanging• Packed in an individual envelope marked with its thickness• Marked every 150mm (6") with thickness• Length ...
Made from 1/2″ wide, C1095 close grain, high ...
Description:
Made from 1/2″ wide, C1095 close grain, high carbon spring steel. Never worry about conversion tables again with these True Metric thicknesses. Used as shim stock to fill gaps and spaces in dies and machinery, can be used for short ...
Working Safely At Height The SLS, Safety Lock ...
Description:
Working Safely At Height The SLS, Safety Lock System, range of tools from Facom were created for use at height. They preserve the comfort, quality and level of performance you expect. The Facom 804FS feeler gauge is constructed from steel ...