Push Button Covers

Push button covers are a convenient way to prevent accidental or unauthorised use of a wide variety of push button switches. They're made from durable transparent materials to allow them to be illuminated or clearly labelled. 


Types of push button covers


Many push button covers are designed with a plastic waterproof cap for outdoor use. Choosing the right push button cover depends on the design series of the button or switch that you have in place. Push button covers are designed in a range of formats to accommodate different shaped switches and alarms. These include round, square or terminal buttons. Breakable seals also exist for shielding emergency buttons. Most push button covers have a hinged lid that clips flips open to give access to the button then clips securely shut again. 


How can push button covers be applied?


Most push button covers are screwed flush to a wall or directly onto equipment. Self-adhesive fastening systems can be used for direct-to-wall application where screws are not appropriate.


...
Read more Read less

Filters

Viewing 1 - 20 of 25 products
Results per page
Description Price Accessory Type For Use With
RS Stock No. 690-6866
Mfr. Part No.704.925.0
BrandEAO
MYR57.59
Each
units
Cover Push Button Switch
RS Stock No. 266-1887
Mfr. Part No.SP60PRT1
BrandMolveno
MYR5.494
Each (In a Pack of 5)
units
Cover Push Button Switch
RS Stock No. 690-6875
Mfr. Part No.704.600.3
BrandEAO
MYR43.70
Each
units
Protective Front Ring 14 Series Push Button Switch
RS Stock No. 903-9347
Mfr. Part No.704.964.5
BrandEAO
MYR11.914
Each (In a Bag of 5)
units
Terminal Cover HMI Components Series 04
RS Stock No. 690-6878
Mfr. Part No.704.955.3
BrandEAO
MYR125.00
Each
units
Protective Front Ring 14 Series Push Button Switch
RS Stock No. 749-2478
Mfr. Part No.F0167LOAAAB
MYR2.94
Each
units
Cover 8300 Series, 8500 Series
RS Stock No. 828-8107
Mfr. Part No.AL-V6
BrandIdec
MYR7.15
Each
units
Switch Terminal Cover A6 Series Miniature Switches and Pilot Devices, All 5/8 in (16mm) Units
RS Stock No. 134-6528
Mfr. Part No.0098.9278
BrandSchurter
MYR37.42
1 Pack of 5
Pack(s)
Protection Cover MSM 22 Series Push Button
RS Stock No. 176-0177
Mfr. Part No.51-920.0
BrandEAO
MYR17.946
Each (In a Bag of 5)
units
Protective Cover Series 51 Switches
RS Stock No. 125-1738
Mfr. Part No.AT4115
MYR9.11
Each (In a Bag of 5)
units
Rectangle Dust Cover YB Series
RS Stock No. 181-7121
Mfr. Part No.AT4002
MYR9.03
Each
units
Dust Cover LB Series Pushbutton Switch
RS Stock No. 181-7130
Mfr. Part No.AT4072
MYR10.07
Each
units
Protective Guard YB Series Pushbutton Switch
RS Stock No. 175-7872
Mfr. Part No.31-925
BrandEAO
MYR19.522
Each (In a Bag of 5)
units
Protective Cover 31 Series
RS Stock No. 181-7153
Mfr. Part No.AT4172
MYR14.54
Each
units
Protective Guard LB Series Pushbutton Switch, UB2 Series Pushbutton Switch
RS Stock No. 175-7849
Mfr. Part No.31-929
BrandEAO
MYR1.776
Each (In a Bag of 25)
units
Insulation Sleeve 2.8 mm Flat Receptacle, 31 Series
RS Stock No. 134-6527
Mfr. Part No.0098.9277
BrandSchurter
MYR37.42
1 Pack of 5
Pack(s)
Protection Cover MSM 19 Series Push Button
RS Stock No. 175-7861
Mfr. Part No.31-928
BrandEAO
MYR2.641
Each (In a Bag of 25)
units
Insulation Sleeve 2.8 mm Flat Receptacle, 31 Series
RS Stock No. 181-7141
Mfr. Part No.AT4141
MYR9.87
Each
units
Protective Guard UB2 Series Pushbutton Switch
RS Stock No. 181-7142
Mfr. Part No.AT4142
MYR14.38
Each
units
Protective Guard UB2 Series Pushbutton Switch
RS Stock No. 176-0221
Mfr. Part No.84-9103.7
BrandEAO
MYR16.862
Each (In a Bag of 5)
units
Protective Cap Series 84 Switches
Related Products
Ideally suited for use as an enabling switch ...
Description:
Ideally suited for use as an enabling switch for manual robotic control. To assist the operator the "On" position requires only light pressure to maintain the function, a higher force is then required to switch from the "On" position to ...
OTTO rugged injection moulded grips that can be ...
Description:
OTTO rugged injection moulded grips that can be outfitted with a variety of switches. Virtually any OTTO switch can be used in the grip including Hall effect and electromechanical switches like OTTO's HTW series push button switches (see typically stock ...
The emergency stop unit features standard 16.2mm dia. ...
Description:
The emergency stop unit features standard 16.2mm dia. panel cut-out and positive break operation with >3mm contact separation in accordance with EN418. An ’Emergency Stop’ label is included which preserves the IP67 sealing. An adaptor kit which permits the switch ...
Sure grip adapter bushes reduce installation time by ...
Description:
Sure grip adapter bushes reduce installation time by simplifying the mounting of the handle to the joystick. Available with various thread sizes or a non-threaded version which has a pilot hole that can be drilled and tapped to the application ...