Air Quality Sensors

Air quality sensors also known as air pollution sensors can detect and monitor air contaminants in the air around us. These sensors can be used inside to detect indoor air pollution and outside to monitor toxins and pollution in the air. They are able to detect dangerous gases which are toxic to humans and animals and can cause respiratory problems if inhaled or absorbed through the skin.


These sensors are small and portable and provide data in near-real time at low cost and using low amounts of power. Sensor based measurement devices are becoming more popular as people are more aware of harmful gases and pollutants and the health impacts this has on individuals and the environment.


The sensor measures and monitors the concentration of certain hazardous gases that are found in the air. If the gases detected are above a certain level which the sensor is set, the device or instrument will then trigger an alarm to warn people to leave the area.


These low-cost pollution sensors are used to gather data about the effects of traffic and factory work on air quality. They can also be used to help keep home environments safe and clean by monitoring indoor air quality levels of airborne particulates, humidity and temperature making you aware of areas with low ventilation.


What do air quality sensors measure?


They are used to detect, measure and monitor relative humidity, ambient temperature and / or levels of carbon dioxide (CO2), volatile organic compounds (VOCs), formaldehyde (HCHO), freon and other refrigerants (CFC / HFC), phosphine (PH3), hydrogen sulphide (H2S), carbon monoxide (CO), nitrogen dioxide (NO2), oxygen (O2), ozone (O3) and other flammable, hazardous or toxic gases.


...
Read more Read less

Filters

Viewing 1 - 20 of 44 products
Results per page
Description Price Gases Detected Accuracy Response Time Meter Type Communication Protocol Power Source Dimensions Weight Height Length Maximum Operating Temperature Minimum Operating Temperature Width
RS Stock No. 102-4163
Mfr. Part No.IAQ-CORE P
Brandams
MYR169.62
Each
units
- - - - - - 15.2 x 17.8 x 4.3mm - 4.3mm 15.2mm +50 °C 0 °C 17.8mm
RS Stock No. 173-0309
Mfr. Part No.IAQ-CORE P
Brandams
MYR226.94
Each (In a Tray of 90)
units
- - - - - - 15.2 x 17.8 x 4.3mm - 4.3mm 15.2mm +50 °C 0 °C 17.8mm
RS Stock No. 134-6669
Mfr. Part No.TGS2600-B00
BrandFigaro
MYR106.29
Each
units
Air Contaminants - - - - - 9.2 (Dia.) x 7.8mm 1.1g 7.8mm - - - 9.2 (Dia.)mm
RS Stock No. 102-4162
Mfr. Part No.IAQ-CORE C
Brandams
MYR158.25
Each
units
- - - - - - 15.2 x 17.8 x 4.3mm - 4.3mm 15.2mm +50 °C 0 °C 17.8mm
RS Stock No. 173-0307
Mfr. Part No.IAQ-CORE C
Brandams
MYR202.573
Each (In a Tray of 90)
units
- - - - - - 15.2 x 17.8 x 4.3mm - 4.3mm 15.2mm +50 °C 0 °C 17.8mm
RS Stock No. 134-6641
Mfr. Part No.TGS2610-D00
BrandFigaro
MYR134.13
Each
units
Butane, Propane - - - - - 9.2 (Dia.) x 12.4mm 1.4g 12.4mm - - - 9.2 (Dia.)mm
RS Stock No. 134-6677
Mfr. Part No.FECS42-20
BrandFigaro
MYR1,160.14
Each
units
Nitrogen Dioxide - - - - - 20.4 (Dia.) x 16.5mm 4.5g 16.5mm - +50 °C -20 °C 20.4 (Dia.)mm
RS Stock No. 134-6655
Mfr. Part No.TGS3870-B00
BrandFigaro
MYR180.03
Each
units
Carbon Monoxide, Methane - - - - - 9.2 (Dia.) x 13mm 1.1g 13mm - - - 9.2 (Dia.)mm
RS Stock No. 134-6649
Mfr. Part No.TGS2444-A00
BrandFigaro
MYR509.16
Each
units
Ammonia - - - - - 9.2 (Dia.) x 7.8mm 1.2g 7.8mm - +50 °C -40 °C 9.2 (Dia.)mm
RS Stock No. 134-6660
Mfr. Part No.TGS6812-D00
BrandFigaro
MYR206.86
Each
units
Hydrogen, Methane - - - - - 12 (Dia.) x 13mm 1.5g 13mm - +70 °C -10 °C 12 (Dia.)mm
RS Stock No. 134-6678
Mfr. Part No.TGS816-A00
BrandFigaro
MYR471.66
Each
units
Butane, Methane, Propane - - - - - 19.5 (Dia.) x 13.5mm 7.7g 13.5mm - - - 19.5 (Dia.)mm
New
RS Stock No. 195-0685
Mfr. Part No.SVM30-J
BrandSensirion
MYR82.595
Each (In a Tray of 80)
units
- ±1 (Temperature) °C, ±5 % RH, 15 (Indoor Air Quality) % 8s - - Mains 39 x 15 x 7.2mm - 7.2mm 39mm +85 °C -20 °C 15mm
RS Stock No. 134-6652
Mfr. Part No.TGS2612-D00
BrandFigaro
MYR162.84
Each
units
Butane, Methane, Propane - - - - - 9.2 (Dia.) x 12.4mm 1.4g 12.4mm - - - 9.2 (Dia.)mm
RS Stock No. 134-6656
Mfr. Part No.TGS832-A00
BrandFigaro
MYR172.42
Each
units
CFC - - - - - 17 (Dia.) x 10mm 2.4g 10mm - - - 17 (Dia.)mm
RS Stock No. 134-6658
Mfr. Part No.TGS2620-C00
BrandFigaro
MYR130.35
Each
units
Organic Vapour - - - - - 9.2 (Dia.) x 7.8mm 1.2g 7.8mm - - - 9.2 (Dia.)mm
RS Stock No. 134-6671
Mfr. Part No.TGS2602-B00
BrandFigaro
MYR130.35
Each
units
Air Contaminants - - - - - 9.2 (Dia.) x 7.8mm 1.1g 7.8mm - - - 9.2 (Dia.)mm
RS Stock No. 134-6642
Mfr. Part No.TGS5042-A00
BrandFigaro
MYR145.52
Each
units
Carbon Monoxide - - - - - 14.1 (Dia.) x 50.2mm 12g 50.2mm - +50 (Continuous) °C, +55 (Intermitter) °C 0 (Continuous) °C, -5 (Intermitter) °C 14.1 (Dia.)mm
RS Stock No. 134-6674
Mfr. Part No.FECS41-250
BrandFigaro
MYR1,018.21
Each
units
Nitric Oxide - - - - - 20.4 (Dia.) x 16.5mm 4.5g 16.5mm - +50 °C -20 °C 20.4 (Dia.)mm
RS Stock No. 134-6647
Mfr. Part No.TGS2611-E00
BrandFigaro
MYR117.70
Each
units
Methane - - - - - 9.2 (Dia.) x 12.4mm 1.4g 12.4mm - - - 9.2 (Dia.)mm
RS Stock No. 134-6673
Mfr. Part No.TGS822-A00
BrandFigaro
MYR137.26
Each
units
Organic Vapour - - - - - 17 (Dia.) x 10mm - 10mm - - - 17 (Dia.)mm
Related Products
Battery operable electrochemical gas sensors from Figaro for ...
Description:
Battery operable electrochemical gas sensors from Figaro for the detection of carbon monoxide. The devices use an environmentally friendly electrolyte and feature reduced sensitivity to interference gases. The TGS5042 type utilizes a standard AA (LR6) battery-sized package with two termination ...
Combustible gas sensors from Figaro utilising tin dioxide ...
Description:
Combustible gas sensors from Figaro utilising tin dioxide (SnO2) semiconductor technology providing an output proportion to gas concentration. These low cost sensors can detect a wide range of combustible gases making them an ideal choice for a wide variety of ...
The Sensirion SDP3x differential pressure sensors are designed ...
Description:
The Sensirion SDP3x differential pressure sensors are designed for high-volume applications where small size is a key requirement. They build on the next-generation CMOSens® sensor chip and provide fast measurement speeds with excellent accuracy and long-term stability. The devices are ...
BPS pressure sensors are based on innovative MEMS ...
Description:
BPS pressure sensors are based on innovative MEMS technology which provides extremely accurate condition readings in a miniature package size. The sensing element is comprised of embedded piezoresistive elements bonded to a chemically etched silicon diaphragm. Compensated analogue outputUltra-low pressure ...