RFID Modules

Filters

Viewing 1 - 20 of 46 products
Results per page
Description Price Component Type Supported Bus Interfaces Maximum Output Power Supply Voltage Series Dimensions Diameter Height Length Maximum Operating Temperature Minimum Operating Temperature Width
RS Stock No. 666-6625
Mfr. Part No.28140
MYR198.04
Each
units
Reader UART - 4.5 → 5.5V - - - - 82.5mm +85 °C -40 °C 62.2mm
RS Stock No. 672-9053
Mfr. Part No.CARD-MIFARE4K
MYR25.56
Each
units
Tag - - - MIFARE® - - - - - - -
RS Stock No. 781-3061
Mfr. Part No.28340
MYR204.29
Each
units
Tag USB - - - - - - - - - -
RS Stock No. 542-517
Mfr. Part No.RWD-MIFARE-OEM
MYR411.96
Each
units
Reader/Writer TTL - 5V MIFARE® - - - - - - -
RS Stock No. 715-4078
Mfr. Part No.CARD-ICODE
MYR13.34
Each
units
Tag - - - - - - - - - - -
RS Stock No. 843-0806
Mfr. Part No.28448
MYR15.04
Each
units
- - - - - - - - - - - -
RS Stock No. 182-206
Mfr. Part No.TRF7960RHBT
MYR24.17
Each
units
Reader SPI 200mW 2.7 → 5.5V - 212.7 x 190.5 x 31.8mm - 31.8mm 212.7mm +85 °C -40 °C 190.5mm
RS Stock No. 145-6292
Mfr. Part No.TRF7960RHBT
MYR16.597
Each (On a Reel of 250)
units
Reader SPI 200mW 2.7 → 5.5V - 212.7 x 190.5 x 31.8mm - 31.8mm 212.7mm +85 °C -40 °C 190.5mm
RS Stock No. 617-1984
Mfr. Part No.RWD-MIFARE
MYR147.75
Each
units
Reader/Writer TTL - 4 → 6V MIFARE® - - - 30.5mm +85 °C -40 °C 18mm
RS Stock No. 715-4075
Mfr. Part No.RWD-MICODE
MYR154.42
Each
units
Reader TTL - 5V - - - - - - - -
RS Stock No. 825-3353
Mfr. Part No.RF-HDT-DVBE-N2
MYR9.85
Each (In a Pack of 5)
units
Tag - - - - - 22mm 3mm - +90 °C -25 °C -
RS Stock No. 921-3016
Mfr. Part No.RF-HDT-DVBE-N2
MYR4.896
Each (On a Reel of 1000)
units
Tag - - - - - 22mm 3mm - +90 °C -25 °C -
RS Stock No. 162-4454
Mfr. Part No.RFID A1_B1 EB (000374)
MYR18.61
Each
units
Reader I2C, Serial, SPI, UART, USB - 2.5 → 3.6V - - - - 46mm +85 °C -25 °C 34mm
RS Stock No. 189-0306
Mfr. Part No.N24RF04EDWPT3G
MYR8.088
Each (In a Pack of 5)
units
Tag I2C - 1.8 → 5.5V - 5 x 4 x 1.5mm - 1.5mm 5mm +105 °C -40 °C 4mm
RS Stock No. 126-2176
Mfr. Part No.RFID-A1 (00319)
MYR104.52
Each
units
Reader, Transponder, Writer I2C, SPI - 2.5 → 3.6V RFID - - - 20.32mm +85 °C -25 °C 20.06mm
RS Stock No. 175-1119
Mfr. Part No.ST25-TAG-BAG-E
MYR57.62
Each
units
- - - - - - - - - - - -
RS Stock No. 825-3344
Mfr. Part No.RF430CL330HCPWR
MYR6.174
Each (In a Pack of 5)
units
Tag SPI - 3 → 3.6V - 4.5 x 5.1 x 1.05mm - 1.05mm 5.1mm +85 °C -40 °C 4.5mm
RS Stock No. 162-8433
Mfr. Part No.TRF7960ARHBT
MYR12.916
Each (On a Reel of 250)
units
Tag - - - - 5.15 x 5.15 x 0.95mm - 0.95mm 5.15mm +110 °C -40 °C 5.15mm
RS Stock No. 189-0364
Mfr. Part No.N24RF64DWPT3G
MYR8.608
Each (In a Pack of 5)
units
Tag I2C - 1.8 → 5.5V - 5 x 4 x 1.5mm - 1.5mm 5mm +105 °C -40 °C 4mm
RS Stock No. 189-0221
Mfr. Part No.N24RF64DWPT3G
MYR5.194
Each (On a Reel of 3000)
units
Tag I2C - 1.8 → 5.5V - 5 x 4 x 1.5mm - 1.5mm 5mm +105 °C -40 °C 4mm
Related Products
Panasonic MN63Y12xx series RFID Tag ICs with built-in ...
Description:
Panasonic MN63Y12xx series RFID Tag ICs with built-in non-volatile memory for use in wireless non-contact near-field communications. The devices feature an encrypted communication function that uses the AES (128 bits) private-key cryptosystem.The MN63Y1212 (824-0708) has only one RF operational mode ...
The RFID B1 module is a 13.56MHz sub ...
Description:
The RFID B1 module is a 13.56MHz sub assembly from Eccel Technology Ltd. The product is suitable for embedded applications and computing/ PLC platforms where RFID capability is needed. An on board is a low-power ARM microcontroller which helps manage ...
The RWD-QT-LP-SMT is a surface mount (SMT) package ...
Description:
The RWD-QT-LP-SMT is a surface mount (SMT) package option suitable for modern printed circuit boards. Supports HitagS256, HitagS2048, Hitag1, Hitag2 and EM4XXX transponders at 125 KHz. To be used with baseboard RWD-QT-SMT for evaluation and development.
The Dynamic NFC Interface Transponder RF430CL330H is an ...
Description:
The Dynamic NFC Interface Transponder RF430CL330H is an NFC Tag Type 4 device that combines a wireless NFC interface and a wired SPI or I²C interface.