Door Catches

Door catches are typically used on internal doors, cupboards and general storage solutions to ensure that the doors are held shut. They are typically screw mounted to ensure a secure, long-lasting and reliable installation. Some can be pressed mounted into place, where a structural lip or support can hold the catch in place.

Catches can be fitted at any height on a door however the most common placements are either central often beside the main handle access or split between the top and bottom of a door. This split installation can offer a better closure for a door as the two catches can provide more even pressure across the length of the door while a central lock or latch can also hold creating three hold points on the door.

Materials and finishes

Materials and finishes vary based on the catch application and can be manufactured in a range of solid, robust materials such as brass, steel, reinforced nylon and a range of plastics to ensure it is reliable and has a long service life. Finished acrylic these different material types varies, metal parts can be plated, the plating reduces the requirement of any maintenance and helps to retain its appearance over time.

Types of Door Catches

  • Ball Catch
  • Double Ball Catch
  • Magnetic Catch
  • Pressure Catch
  • Grabber Catch

...
Read more Read less

Filters

Viewing 1 - 20 of 59 products
Results per page
Description Price Catch Type Material Dimensions Catch Fixing Hole Distance Strike Fixing Hole Distance Length Width Fixing Hole Size
RS Stock No. 181-244
BrandRS PRO
MYR18.918
Each (In a Pack of 4)
units
- - - - - - - -
RS Stock No. 181-250
BrandRS PRO
MYR49.408
Each (In a Pack of 4)
units
- - - - - - - -
RS Stock No. 665-9932
BrandRS PRO
MYR2.153
Each (In a Pack of 4)
units
- Plastic - - - - - -
RS Stock No. 665-9954
BrandRS PRO
MYR25.228
Each (In a Pack of 4)
units
- Plastic, Steel - - - - - -
RS Stock No. 293-7869
BrandRS PRO
MYR111.84
Each
units
- Die Cast Zinc - - - - - -
RS Stock No. 161-1956
BrandRS PRO
MYR37.24
Each (In a Bag of 2)
units
Grabber Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 124-1903
BrandRS PRO
MYR55.77
Each
units
- Die Cast Zinc - - - - - -
RS Stock No. 124-1900
BrandRS PRO
MYR155.54
Each
units
- Die Cast Zinc - - - 104.5mm 31.5mm -
RS Stock No. 161-1954
BrandRS PRO
MYR38.96
Each (In a Bag of 2)
units
Grabber Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 161-1953
BrandRS PRO
MYR31.09
Each
units
Grabber ABS, PC 23.5 x 11.4 x 72 mm, 38.2 x 17 x 43mm 38.2mm 55.0mm 38.2mm 17.0mm 4.3 x 8.3mm
RS Stock No. 161-1955
BrandRS PRO
MYR20.70
Each
units
Grabber Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 124-1901
BrandRS PRO
MYR119.40
Each
units
- - - - - - - -
RS Stock No. 288-8234
Mfr. Part No.E3-10-504-50-RS
BrandSouthco
MYR165.87
Each
units
- Die Cast Zinc 47.5 x 37.5 x 22mm - - 47.5mm 37.5mm -
RS Stock No. 227-0920
Mfr. Part No.C3-805-RS
BrandSouthco
MYR35.60
Each
units
Grabber ABS, PC 48.3 x 28.2mm 40.6mm 55.0mm 48.3mm 28.2mm 3.3mm
RS Stock No. 245-5531
Mfr. Part No.E4-10-201-10-RS
BrandSouthco
MYR42.58
Each
units
- - 19 x 13 x 30.3mm - - 19.0mm 13.0mm -
RS Stock No. 278-449
Mfr. Part No.XR-100-1-278-449
MYR50.528
Each (In a Pack of 5)
units
- - 25.5 x 19.2 x 24.5mm - - 25.5mm 19.2mm -
RS Stock No. 288-8278
Mfr. Part No.62-10-23-RS
BrandSouthco
MYR81.08
Each
units
- Steel, Zinc 55 x 19 x 32mm - - 55.0mm 19.0mm -
RS Stock No. 293-7847
BrandPinet
MYR9.39
Each (In a Pack of 2)
units
Roller Plastic 34 x 10mm - 21.3mm 34.0mm 10.0mm 3.4mm
RS Stock No. 447-5341
Mfr. Part No.C2-33-15-3-RS
BrandSouthco
MYR148.46
Each
units
- Steel 109 x 41 x 34mm - - 109.0mm 41.0mm -
RS Stock No. 917-4359
Mfr. Part No.842082
BrandPinet
MYR25.53
Each (In a Pack of 2)
units
- Plastic - - - - - -