Linear Plain Bearings - Replacement Liners

Filters

Viewing 1 - 7 of 7 products
Results per page
Description Price For Bearing Length For Bearing Inside Diameter
RS Stock No. 311-3676
Mfr. Part No.JUM-01-25
BrandIgus
MYR26.95
Each
units
57mm 25mm
RS Stock No. 311-3654
Mfr. Part No.JUM-01-20
BrandIgus
MYR26.78
Each
units
44mm 20mm
RS Stock No. 712-5008
Mfr. Part No.ESTM-08-SL
BrandIgus
MYR12.97
Each
units
19mm 8mm
RS Stock No. 712-5002
Mfr. Part No.ESTM-10-SL
BrandIgus
MYR21.60
Each
units
20mm 10mm
RS Stock No. 311-3648
Mfr. Part No.JUM-01-16
BrandIgus
MYR21.30
Each
units
35mm 16mm
RS Stock No. 712-5005
Mfr. Part No.ESTM-06-SL
BrandIgus
MYR14.15
Each
units
18mm 6mm
RS Stock No. 311-3632
Mfr. Part No.JUM-01-12
BrandIgus
MYR18.03
Each
units
31mm 12mm
Related Products
The black iglidur® Tribo-Tape for stressed areas now ...
Description:
The black iglidur® Tribo-Tape for stressed areas now offers even more wear resistance and design freedom. Designed for lining areas of wear and where frequent maintenance is required. Space requirement is at a low due to its 0.5mm thickness (0.65mm ...
Lubricant free V400 iglidur® Tribo-Tape is a sliding ...
Description:
Lubricant free V400 iglidur® Tribo-Tape is a sliding film offering increased wear resistance and design freedom. Designed for lining areas of wear, the V400 bearing liner is up to 10 times more wear resistant than other liners. Space requirement is ...
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation. Maximum Speed Dry: 91.4 m/minMaximum Speed Lubricated: 251.4 m/minMaximum PV Product: 430 m/min x kg/cm².
Share the same dimensions as LBBR ball bushingsPolyacetal ...
Description:
Share the same dimensions as LBBR ball bushingsPolyacetal with specific polyethylene bearing surfacesLow-maintenance. Good emergency running properties and low “stick”Resistant to heavy static stress and insensitive to shocksInitial lubrication necessary, even if dry running is required later.