Pneumatic Straight Tube-to-Tube Adaptors

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic straight tube to tube adaptors being one example.

What are pneumatic straight tube to tube adaptors used for?

Pneumatic straight tube-to-tube adaptors are used to connect two tubes together. Straight adapters do not change the tube direction and most work with a range of materials such as nylon, polyurethane and polyamide.

Types of pneumatic straight tube to tube adaptors

Pneumatic straight tube-to-tube adaptors come in a variety of diameters, sizes, and materials. Some are nickel-plated brass and others feature glass-filled nylon.


...
Read more Read less

Filters

Viewing 1 - 20 of 411 products
Results per page
Description Price Manufacturer Series Tube Connection A Tube Connection B Body Material Finish Maximum Operating Pressure Minimum Operating Temperature Chemical Resistant Food Grade Tube Connection B - Type Tube Connection A - Tube Size Tube Connection A - Type Tube Connection B - Tube Size Maximum Operating Temperature
RS Stock No. 916-0873
BrandRS PRO
MYR6.286
Each (In a Pack of 10)
units
- Push In 6 mm Push In 6 mm Polyoxymethylene Nickel Plated 10 bar 0°C - - Push In 6mm Push In 6mm +60°C
RS Stock No. 176-1394
BrandRS PRO
MYR9.385
Each (In a Pack of 10)
units
- Push In 8 mm Push In 6 mm - - 20 bar -20°C - - Push In 8mm Push In 6mm +80°C
New
RS Stock No. 197-7713
BrandRS PRO
MYR321.51
1 Bag of 10
Bag(s)
57000 - - Nickel Plated Brass - 20bar -20°C - - - - - - +80°C
RS Stock No. 144-2647
BrandRS PRO
MYR60.05
1 Bag of 10
Bag(s)
- Push In 8 mm Push In 10 mm Plastic - 9.9 kgf/cm², 990 kPa 0°C - - Push In 8mm Push In 10mm +60°C
RS Stock No. 176-2164
BrandRS PRO
MYR155.40
Each (In a Pack of 10)
units
- Push In 10 mm Push In 10 mm Stainless Steel - 20 bar -15°C Yes Yes Push In 10mm Push In 10mm +200°C
RS Stock No. 176-1801
BrandRS PRO
MYR22.932
Each (In a Pack of 10)
units
- Push In 10 mm Push In 6 mm - - 20 bar -20°C - - Push In 10mm Push In 6mm +80°C
RS Stock No. 176-1869
BrandRS PRO
MYR16.769
Each (In a Pack of 10)
units
- Push In 12 mm Push In 8 mm - - 20 bar -20°C - - Push In 12mm Push In 8mm +80°C
New
RS Stock No. 197-7711
BrandRS PRO
MYR276.82
1 Bag of 10
Bag(s)
57000 - - Nickel Plated Brass - 20bar -20°C - - - - - - +80°C
RS Stock No. 916-0886
BrandRS PRO
MYR8.657
Each (In a Pack of 10)
units
- Push In 10 mm Push In 10 mm Polyoxymethylene Nickel Plated 10 bar 0°C - - Push In 10mm Push In 10mm +60°C
RS Stock No. 176-1874
BrandRS PRO
MYR16.983
Each (In a Pack of 10)
units
- Push In 14 mm Push In 8 mm - - 20 bar -20°C - - Push In 14mm Push In 8mm +80°C
RS Stock No. 144-2643
BrandRS PRO
MYR42.32
1 Bag of 10
Bag(s)
- Push In 4 mm Push In 6 mm Plastic - 9.9 kgf/cm², 990 kPa 0°C - - Push In 4mm Push In 6mm +60°C
New
RS Stock No. 197-7706
BrandRS PRO
MYR186.77
1 Bag of 10
Bag(s)
57000 - - Nickel Plated Brass - 20bar -20°C - - - - - - +80°C
RS Stock No. 176-1802
BrandRS PRO
MYR29.744
Each (In a Pack of 10)
units
- Push In 12 mm Push In 8 mm - - 20 bar -20°C - - Push In 12mm Push In 8mm +80°C
RS Stock No. 176-1800
BrandRS PRO
MYR22.646
Each (In a Pack of 10)
units
- Push In 12 mm Push In 10 mm - - 20 bar -20°C - - Push In 12mm Push In 10mm +80°C
New
RS Stock No. 197-7878
BrandRS PRO
MYR50.69
1 Bag of 10
Bag(s)
- Push In 6 mm Push In 6 mm Nickel Plated Brass - 20bar +80°C - - Push In 6mm Push In 6mm -20°C
RS Stock No. 176-1871
BrandRS PRO
MYR12.70
Each (In a Pack of 10)
units
- Push In 10 mm Push In 6 mm - - 20 bar -20°C - - Push In 10mm Push In 6mm +80°C
RS Stock No. 176-1798
BrandRS PRO
MYR27.735
Each (In a Pack of 10)
units
- Push In 14 mm Push In 14 mm - - 20 bar -20°C - - Push In 14mm Push In 14mm +80°C
RS Stock No. 176-1405
BrandRS PRO
MYR10.906
Each (In a Pack of 10)
units
- Push In 4 mm Push In 4 mm - - 20 bar -20°C - - Push In 4mm Push In 4mm +80°C
RS Stock No. 176-2162
BrandRS PRO
MYR96.111
Each (In a Pack of 10)
units
- Push In 6 mm Push In 6 mm Stainless Steel - 20 bar -15°C Yes Yes Push In 6mm Push In 6mm +200°C
New
RS Stock No. 197-7883
BrandRS PRO
MYR118.73
1 Bag of 10
Bag(s)
- Push In 8 mm Push In 4 mm Nickel Plated Brass - 20bar -20°C - - Push In 8mm Push In 4mm +80°C
Related Products
Festo NPQP range of push in bulkhead connectors ...
Description:
Festo NPQP range of push in bulkhead connectors that are designed to easily connect tubing and provide a reliable seal. Polypropylene fitting for use in applications with extreme media influences. For pneumatic applications with a temperature range up to 60°C ...
SMC’s KQG2 stainless steel range provides engineers with ...
Description:
SMC’s KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and ...
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
Ermeto Original or EO® progressive ring fittings, for ...
Description:
Ermeto Original or EO® progressive ring fittings, for metric tube, are manufactured from mild steel, with zinc plated and passivated finish. They are available in light duty and heavy duty series to cover a wide range of pressure ratings. Each ...