Pneumatic Bulkhead Tube-to-Tube Adaptors

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry, as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems contain many components, pneumatic bulkhead tube-to-tube adaptors being one example. Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

What are pneumatic bulkhead tube-to-tube adaptors used for?

Pneumatic bulkhead tube-to-tube adaptors connect tubes through a panel (the bulkhead). They are designed to provide a reliable seal on both sides with no loss of air. Pneumatic bulkhead tube-to-tube adaptors work well with nylon and polyurethane tubes.

Types of pneumatic bulkhead tube-to-tube adaptors

Pneumatic bulkhead tube-to-tube adaptors come in a variety of diameter, thread size, grade and material. The adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 1 - 20 of 101 products
Results per page
Description Price Manufacturer Series Type Tube Connection A Tube Connection B Body Material Mounting Hole Diameter Thread Material Finish Chemical Resistant Food Grade Maximum Operating Pressure Tube Connection B - Tube Size Maximum Operating Temperature Minimum Operating Temperature
New
RS Stock No. 197-7721
BrandRS PRO
MYR823.78
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 22mm - - - - 20bar - +80°C -20°C
New
RS Stock No. 197-7722
BrandRS PRO
MYR848.46
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 23mm - - - - 20bar - +80°C -20°C
RS Stock No. 176-1296
BrandRS PRO
MYR19.744
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 4 mm Push In 4 mm Brass - Brass Nickel Plated - - 20 bar 4mm +80°C -20°C
RS Stock No. 176-1776
BrandRS PRO
MYR43.837
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 12 mm Push In 12 mm Brass - Brass Nickel Plated - - 20 bar 12mm +80°C -20°C
RS Stock No. 144-2632
BrandRS PRO
MYR380.35
1 Bag of 10
Bag(s)
- Bulkhead Union Push In 12 mm Push In 12 mm - - Brass Nickel Plated - - 9.9 kgf/cm², 990 kPa 12mm +60°C 0°C
RS Stock No. 176-2244
BrandRS PRO
MYR18.403
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 4 mm - Brass - Brass Nickel Plated - - - 4mm +80°C -20°C
RS Stock No. 916-0827
BrandRS PRO
MYR17.554
Each (In a Pack of 10)
units
- Straight Push In 8 mm Push In 8 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 8mm +60°C 0°C
RS Stock No. 176-2247
BrandRS PRO
MYR24.847
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 10 mm Push In 10 mm Brass - Brass Nickel Plated - - 20 bar 10mm +80°C -20°C
RS Stock No. 176-2245
BrandRS PRO
MYR18.99
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 6 mm Push In 6 mm Brass - Brass Nickel Plated - - - 6mm +80°C -20°C
RS Stock No. 176-1297
BrandRS PRO
MYR21.845
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 6 mm Push In 6 mm Brass - Brass Nickel Plated - - 20 bar 6mm +80°C -20°C
New
RS Stock No. 197-7720
BrandRS PRO
MYR564.31
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 22mm - - - - 20bar - +80°C -20°C
RS Stock No. 176-1298
BrandRS PRO
MYR24.989
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 8 mm Push In 8 mm Brass - Brass Nickel Plated - - 20 bar 8mm +80°C -20°C
RS Stock No. 176-2246
BrandRS PRO
MYR21.919
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 8 mm Push In 8 mm Brass - Brass Nickel Plated - - - 8mm +80°C -20°C
RS Stock No. 176-1777
BrandRS PRO
MYR56.204
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 14 mm Push In 14 mm Brass - Brass Nickel Plated - - 20 bar 14mm +80°C -20°C
RS Stock No. 916-0836
BrandRS PRO
MYR30.75
Each (In a Pack of 10)
units
- Straight Push In 10 mm Push In 10 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 10mm +60°C 0°C
New
RS Stock No. 197-7716
BrandRS PRO
MYR280.15
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 12mm - - - - 20bar - +80°C -20°C
RS Stock No. 916-0823
BrandRS PRO
MYR14.334
Each (In a Pack of 10)
units
- Straight Push In 6 mm Push In 6 mm Nickel Plated Brass 15mm - Nickel Plated - - 10 bar 6mm +60°C 0°C
New
RS Stock No. 197-7717
BrandRS PRO
MYR312.17
1 Bag of 10
Bag(s)
57000 Bulkhead Connector - - Nickel Plated Brass 14mm - - - - 20bar - +80°C -20°C
RS Stock No. 916-0820
BrandRS PRO
MYR13.461
Each (In a Pack of 10)
units
- Straight Push In 4 mm Push In 4 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 4mm +60°C 0°C
RS Stock No. 176-1775
BrandRS PRO
MYR35.733
Each (In a Pack of 10)
units
- Bulkhead Connector Push In 10 mm Push In 10 mm Brass - Brass Nickel Plated - - 20 bar 10mm +80°C -20°C
Related Products
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
Connects 2 tubes through a panel. solid construction ...
Description:
Connects 2 tubes through a panel. solid construction and compact, external shapes easy to clean, components comply with FDA standard and 1935/2004/EC regulation, excellent resistance to corrosion, individual unit quality control and dating in order to guarantee quality and traceability, ...
KQ2 one-touch, metric and inch size fittings are ...
Description:
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release ...
RS Pro push-in fittings made of nickel plated ...
Description:
RS Pro push-in fittings made of nickel plated brass ensure highest quality,reliability and endurance in the pneumatic field. Main advantages:- Quick connection and disconnection- Full Flow and Vacuum resistant tank to special shaped seals- 3 threads available, BSPP, BSPT (universal ...