Hydraulic Check Valves - Line Mounting

Filters

Viewing 1 - 16 of 16 products
Results per page
Description Price Manufacturer Series Connection Port Thread Cracking Pressure Maximum Flow Rate Body Material Seal Material Maximum Operating Pressure Thread Standard Thread Size Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 324-4944
BrandRS PRO
MYR514.68
Each
units
FT257 BSP 1/4 - 110L/min Stainless Steel, Steel - 400 bar BSP 1/4in -20°C +200°C
RS Stock No. 283-8324
BrandRS PRO
MYR168.10
Each
units
FT260 G 3/4 - 80L/min Steel - 350 bar G 3/4in -20°C +100°C
RS Stock No. 324-4966
BrandRS PRO
MYR682.43
Each
units
FT257 BSP 1/2 - 65L/min Stainless Steel, Steel - 400 bar BSP 1/2in -20°C +200°C
RS Stock No. 324-4950
BrandRS PRO
MYR519.14
Each
units
FT257 BSP 3/8 - 40L/min Stainless Steel, Steel - 400 bar BSP 3/8in -20°C +200°C
RS Stock No. 324-4972
BrandRS PRO
MYR936.95
Each
units
FT257 BSP 3/4 - 90L/min Stainless Steel, Steel - 400 bar BSP 3/4in -20°C +200°C
RS Stock No. 283-8295
BrandRS PRO
MYR63.25
Each
units
FT260 G 1/4 - 15L/min Steel - 350 bar G 1/4in -20°C +100°C
RS Stock No. 283-8302
BrandRS PRO
MYR79.48
Each
units
FT260 G 3/8 - 30L/min Steel - 350 bar G 3/8in -20°C +100°C
RS Stock No. 283-8318
BrandRS PRO
MYR115.71
Each
units
FT260 G 1/2 - 55L/min Steel - 350 bar G 1/2in -20°C +100°C
RS Stock No. 807-312
Mfr. Part No.EW06LCF
BrandParker
MYR48.82
Each
units
RHZ18 G 1/2 A - - Steel Nitrile Rubber 400 bar G 1/2in -40°C +120°C
RS Stock No. 237-2442
Mfr. Part No.2301
BrandParker
MYR153.60
Each
units
- G 1/4 0.35bar 20L/min Steel Nylon - G 1/4in -30°C +90°C
RS Stock No. 237-2492
Mfr. Part No.2305
BrandParker
MYR588.56
Each
units
- G 1 0.35bar 150L/min Steel Nylon - G 1in -30°C +90°C
RS Stock No. 237-2470
Mfr. Part No.2303
BrandParker
MYR251.24
Each
units
- G 1/2 0.35bar 50L/min Steel Nylon - G 1/2in -30°C +90°C
RS Stock No. 237-2486
Mfr. Part No.2304
BrandParker
MYR373.84
Each
units
- G 3/4 0.35bar 100L/min Steel Nylon - G 3/4in -30°C +90°C
RS Stock No. 727-856
Mfr. Part No.RHDIR3/8CF
BrandParker
MYR393.11
Each
units
L3 G 3/8 - 8m/s Zinc Plated Steel Nitrile Rubber 400 bar G 3/8in -35°C +100°C
RS Stock No. 237-2458
Mfr. Part No.2302
BrandParker
MYR214.71
Each
units
- G 3/8 0.35bar 30L/min Steel Nylon - G 3/8in -30°C +90°C
RS Stock No. 727-840
Mfr. Part No.RHDI1/4CF
BrandParker
MYR255.80
Each
units
L3 G 1/4 - 8m/s Zinc Plated Steel Nitrile Rubber 400 bar G 1/4in -35°C +100°C
Related Products
High pressure ’L’ bore three way diverter ball ...
Description:
High pressure ’L’ bore three way diverter ball valves with BSP parallel threaded connections at all ports. These valves would be included in most circuits requiring a change over optionSuitable for use with water and oilNitrile seals, Delrin® ball seat. ...
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
The single station gauge isolator valve by Parker ...
Description:
The single station gauge isolator valve by Parker has been designed to prevent pressure gauge damage and extend gauge life.When installed between gauge and pressure line, it protects the pressure gauge from continuous hydraulic pressure, surges or shock loads.Operated by ...
Parkers ZDR series of pilot operated CETOP 03 ...
Description:
Parkers ZDR series of pilot operated CETOP 03 reducing valves are designed for systems with a maximum flow rate of up to 80 ml/min. The sandwich / stackable design allows various circuit elements to be mounted together under the directional ...