Tube Clamps

A tube clamp is a fastening device used to hold or secure tubes tightly together to prevent movement or separation through the application of inward pressure. Suitable for hoses and steel tubes of all different sizes.

...
Read more Read less

Filters

Viewing 21 - 40 of 61 products
Results per page
Description Price Number of Tubes Held For Tube Outside Diameter Clamp Spacing Body Material Maximum Operating Temperature Minimum Tube Outer Diameter Maximum Tube Outer Diameter Minimum Operating Temperature
RS Stock No. 145-9778
BrandRS PRO
MYR156.71
1 Bag of 5
Bag(s)
Double 28mm 1.5m PP +90°C - 28mm -30°C
RS Stock No. 145-9776
BrandRS PRO
MYR90.02
1 Bag of 5
Bag(s)
Single 25mm 1.5m PP +90°C - 25mm -30°C
RS Stock No. 145-9764
BrandRS PRO
MYR84.10
1 Bag of 5
Bag(s)
Single 15mm 1.2m PP +90°C - 15mm -30°C
RS Stock No. 145-9775
BrandRS PRO
MYR135.20
1 Bag of 5
Bag(s)
Double 25mm 1.5m PP +90°C - 25mm -30°C
RS Stock No. 145-9768
BrandRS PRO
MYR107.94
1 Bag of 5
Bag(s)
Double 18mm 1.2m PP +90°C - 18mm -30°C
RS Stock No. 145-9760
BrandRS PRO
MYR88.36
1 Bag of 5
Bag(s)
Double 12mm 1.2m PP +90°C - 12mm -30°C
RS Stock No. 145-9759
BrandRS PRO
MYR74.00
1 Bag of 5
Bag(s)
Single 12mm 1.2m PP +90°C - 12mm -30°C
RS Stock No. 145-9772
BrandRS PRO
MYR135.20
1 Bag of 5
Bag(s)
Double 22mm 1.2m PP +90°C - 22mm -30°C
RS Stock No. 145-9773
BrandRS PRO
MYR90.02
1 Bag of 5
Bag(s)
Single 22mm 1.2m PP +90°C - 22mm -30°C
RS Stock No. 145-9756
BrandRS PRO
MYR88.83
1 Bag of 5
Bag(s)
Single 9mm 1m PP +90°C - 9mm -30°C
RS Stock No. 145-9767
BrandRS PRO
MYR84.10
1 Bag of 5
Bag(s)
Single 18mm 1.2m PP +90°C - 18mm -30°C
RS Stock No. 145-9771
BrandRS PRO
MYR135.20
1 Bag of 5
Bag(s)
Double 20mm 1.2m PP +90°C - 20mm -30°C
RS Stock No. 145-9753
BrandRS PRO
MYR88.36
1 Bag of 5
Bag(s)
Double 6mm 1m PP +90°C - 6mm -30°C
RS Stock No. 309-8426
Mfr. Part No.RBP1-428
BrandParker
MYR37.764
Each (In a Pack of 5)
units
Double 28mm 1.5m PP +90°C - 28mm -30°C
RS Stock No. 309-8353
Mfr. Part No.RBP1-112
BrandParker
MYR27.956
Each (In a Pack of 5)
units
Double 12mm 0.9m PP +90°C - 12mm -30°C
RS Stock No. 807-407
Mfr. Part No.RAP3-108
BrandParker
MYR17.50
Each (In a Pack of 5)
units
Single 8mm 0.9m PP +90°C - 8mm -30°C
RS Stock No. 727-581
Mfr. Part No.RAP3-110
BrandParker
MYR17.50
Each (In a Pack of 5)
units
Single 10mm 0.9m PP +90°C - 10mm -30°C
RS Stock No. 727-676
Mfr. Part No.RAP3-11/4
BrandParker
MYR14.826
Each (In a Pack of 5)
units
Single 1/4in 0.9m PP +90°C - 1/4in -30°C
RS Stock No. 309-8404
Mfr. Part No.RBP1-322
BrandParker
MYR31.954
Each (In a Pack of 5)
units
Double 22mm 1.2m PP +90°C - 22mm -30°C
RS Stock No. 727-705
Mfr. Part No.RAP3-319
BrandParker
MYR25.148
Each (In a Pack of 5)
units
Single 3/4in 48in PP +90°C - 3/4in -30°C
Related Products
Manual flaring tools are used to produce the ...
Description:
Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube. These tools are used in ...
Series A Tubeclamps by Parker designed to enable ...
Description:
Series A Tubeclamps by Parker designed to enable fixing of straight and bent, tubes and hoses. The clamp body is in two equal halves with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and ...
RS Pro Tube Clamps, designed to enable fixing ...
Description:
RS Pro Tube Clamps, designed to enable fixing of straight and bent, tubes and hoses. The clamp body is a square/open design with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and vibration damping. ...
Series B Tubeclamps by Parker designed to enable ...
Description:
Series B Tubeclamps by Parker designed to enable fixing of straight and bent, tubes and hoses. The clamp body is a square/open design with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and vibration ...