Motorised & Actuated Valves

Motorised valves are used to control water flow from the boiler to heating and hot water circuits, and is operated electrically.


Types of motorised valves:

A motorised valve can be a 2 port valve or a 3 port valve.
•2-port - The valve has 2 pipe connections (ports) and permits or blocks flow between the ports depending on whether it is actuated or not. Flow is permitted when the valve is actuated and blocked in its resting state.


•3-port - The valve has 3 pipe connections, in a T formation. The centre leg of the T is the inlet and the two short arms are the outlets, usually referred to as ports A and B. Actuation controls whether the flow from the inlet passes to the A or B port. In the resting state flow is to the B port (usually the hot water circuit).




Actuated valves

Actuated valves are the mechanism for opening and closing the valve, an actuator requires a control signal and a source of energy. Actuators may be only to open and close the valve, or may allow intermediate positioning; some valve actuators include switches or other ways to remotely indicate the position of the valve.

Valves and Actuators are two completely separate components; however, they do work together to accomplish a common task.

...
Read more Read less

Filters

Viewing 1 - 20 of 44 products
Results per page
Description Price Compatible Pipe Size Number of Ports Maximum Working Pressure Supply Voltage Body Material
RS Stock No. 799-8755
BrandRS PRO
MYR1,261.57
Each
units
1/2in 3 1000 psi - Stainless Steel
RS Stock No. 799-8834
BrandRS PRO
MYR2,365.56
Each
units
1/2in 3 1000 psi 24 V ac/dc, 110 V, 220 V Stainless Steel
RS Stock No. 799-8803
BrandRS PRO
MYR1,574.03
Each
units
2-1/2in - - - EPDM Liner
RS Stock No. 812-5239
BrandRS PRO
MYR109.48
Each
units
3/4in 1 40 bar - Brass
RS Stock No. 122-5839
BrandRS PRO
MYR1,418.00
Each
units
1 1/4in 3 - - -
RS Stock No. 799-8771
BrandRS PRO
MYR1,610.95
Each
units
3/4in 3 1000 psi - Stainless Steel
RS Stock No. 799-8768
BrandRS PRO
MYR1,697.05
Each
units
1in 3 1000 psi - Stainless Steel
RS Stock No. 805-6036
BrandRS PRO
MYR281.67
Each
units
1/8in 5 10 bar - Extruded Aluminium Alloy
RS Stock No. 799-8847
BrandRS PRO
MYR2,751.46
Each
units
1in 3 1000 psi 24 V ac/dc, 110 V, 220 V Stainless Steel
RS Stock No. 720-9267
BrandRS PRO
MYR1,051.91
Each
units
- - 17 bar - Carbon Steel
RS Stock No. 805-6045
BrandRS PRO
MYR295.87
Each
units
1/4 in, 1/8 in 5 10 bar - Extruded Aluminium Alloy
RS Stock No. 805-6058
BrandRS PRO
MYR651.50
Each
units
1/4 in, 1/8 in 2 100 psi - Extruded Aluminium Alloy
RS Stock No. 799-8838
BrandRS PRO
MYR2,496.87
Each
units
3/4in 3 1000 psi 24 V ac/dc, 110 V, 220 V Stainless Steel
RS Stock No. 812-5236
BrandRS PRO
MYR81.05
Each
units
1/2in 2 40 bar - Brass
RS Stock No. 799-8819
BrandRS PRO
MYR1,589.53
Each
units
3in - - - Nitrile Liner
RS Stock No. 799-8780
BrandRS PRO
MYR1,881.17
Each
units
1in 3 1000 psi - Stainless Steel
RS Stock No. 799-8793
BrandRS PRO
MYR1,158.50
Each
units
2in - - - Nitrile Liner
RS Stock No. 799-8816
BrandRS PRO
MYR1,489.15
Each
units
2in - - - Nitrile Liner
RS Stock No. 799-8796
BrandRS PRO
MYR4,583.39
Each
units
2in 3 800 psi - Stainless Steel
RS Stock No. 805-6051
BrandRS PRO
MYR437.49
Each
units
1/4 in, 1/8 in 2 100 psi - Extruded Aluminium Alloy
Related Products
Designed for use with aggressive fluids in corrosive ...
Description:
Designed for use with aggressive fluids in corrosive environmentsSuited to higher pressure and temperature applicationsOne piece full bore constructionOperating Temperature to +200°C’O’ rings: Viton rubber.
The Festo VZBE manual operated pneumatic valve is ...
Description:
The Festo VZBE manual operated pneumatic valve is made of stainless steel with nominal width of 1". It has a 3/2-way, L shape bore valve function. Type of actuation = mechanicalSealing principle = softAssembly position = AnyMounting type = line ...
RS Stainless Steel Screwed End Ball Valves for ...
Description:
RS Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" - 3" (DN8 - DN80)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment castingBlow-out proof stemLocking deviceTapped and drilled mounting pad (option)TA-Luft approved (option)Length conform to DIN ...
RS High Pressure Ball Valves for the control ...
Description:
RS High Pressure Ball Valves for the control of flow. 1/4in. - 2in. (DN8∼DN50)W.P.: 3600 WOG (PN250)W.T.: -20゚C ∼ 260゚CInvestment castingBlow-out proof stemAnti-static device (option)Locking deviceISO 5211 Mounting padSeal welded ends.