Brass & Copper Push Fit Fittings

Copper Pipe Fittings
Copper is used as it can tolerate very high temperatures and as such, is used widely for central heating applications

Different types of Fittings

Adapters
Adapters are used to extend runs, or to simply change the connection type at the end of a pipe

Bushings
Bushings are used to join pipes of different sizes, usually by reducing a larger fitting down to a smaller pipe.

Couplings
A coupling is used to extend the run of a pipe, or change pipe sizes

Elbows
If you need to change the direction of flow, elbows are likely your best bet. Produced primarily in 90 and 45 degree angles (unique sizes like 22.5 and 60 are also available), elbows can be threaded or sweated, and are one of the most crucial fittings used in plumbing

Tees
When more than one branch is required of a water supply, tees are the way to go. Essentially a long coupling with an outlet on the side, these fittings feature their outlets at 90° from the inlet, and are sized according to their "run" (the horizontal, or straight-through dimension of the fitting), and the side outlet (the "top" of the fitting, 90 degrees off the run). When the run of a tee is smaller than the side outlet, it's often referred to as a "bull head" fitting.

Caps and Plugs
A cap, as its name suggests, is a cap that goes over the end of a pipe, creating a dead end. Plugs also stop up a pipe or tube system, but are plugged, like a stopper, into the end of the pipe.

Cross type Fitting
Cross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.

...
Read more Read less

Filters

Viewing 1 - 20 of 26 products
Results per page
Description Price Fitting Direction Fitting Type Push Fit Pipe Size Threaded Connection Threaded Tee Connection Demountable Connection Gender Tee Gender Thread Size Thread Size Tee Thread Standard Thread Standard Tee Material
RS Stock No. 340-6754
Mfr. Part No.PM22WB
MYR90.51
Each
units
90° Wall Plate Elbow Adapter 22mm - - - - - 3/4in - BSP - Brass
RS Stock No. 468-6210
Mfr. Part No.15SVSTC
BrandJohn Guest
MYR84.10
Each
units
- Service Valve 15mm - - Yes - - 1/2in - BSP - Brass
RS Stock No. 340-6760
Mfr. Part No.MM051504N
MYR31.143
Each (In a Pack of 3)
units
Straight Stem Adapter 15mm 1/2 in R Male - - - Male 1/2in - R - Brass
RS Stock No. 199-2376
Mfr. Part No.22MC(3/4)BRASS
BrandJohn Guest
MYR72.25
Each
units
Straight Coupler 22mm 3/4 in BSP Male - Yes - Male 3/4in - BSP - Brass
RS Stock No. 199-2360
Mfr. Part No.15MC(1/2)BRASS
BrandJohn Guest
MYR43.08
Each
units
Straight Coupler 15mm 1/2 in BSP Male - Yes - Male 1/2in - BSP - Brass
RS Stock No. 712-6746
Mfr. Part No.65121
MYR32.69
Each
units
Straight Coupler 22mm - - Yes - - - - - - Brass
RS Stock No. 712-6730
Mfr. Part No.65524
MYR44.91
Each
units
90° Elbow 22mm - - Yes - - - - - - Brass
RS Stock No. 712-6777
Mfr. Part No.TX3/TX243G 22X3/4
MYR77.67
Each
units
Straight Taper Coupler 22mm 3/4 in R Male - Yes - Male 3/4in - R - Brass
RS Stock No. 712-6783
Mfr. Part No.TX27/TX130 22X15X15
MYR48.14
Each
units
- One End & Branch Reducer Tee 22 x 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6742
Mfr. Part No.TX61/TX301 15
MYR22.835
Each (In a Pack of 2)
units
- End Stop 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6714
Mfr. Part No.TX12/TX090 15
MYR51.00
1 Pack of 2
Pack(s)
90° Elbow 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6736
Mfr. Part No.TX480 15
MYR68.46
Each
units
- Service Valve 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6733
Mfr. Part No.TX3/TX243G 15
MYR26.015
Each (In a Pack of 2)
units
Straight Taper Coupler 15mm 1/2 in R Male - Yes - Male 1/2in - R - Brass
RS Stock No. 712-6764
Mfr. Part No.TX30 15X1/2/TX130G 15x1/2x15
MYR72.86
Each
units
- Branch Tee 15mm - 1/2 in G Female Yes Female - - 1/2in - G Brass
RS Stock No. 712-6727
Mfr. Part No.65114
MYR24.10
Each (In a Pack of 2)
units
Straight Coupler 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6749
Mfr. Part No.TX2/TX270G 15X1/2
MYR49.27
Each
units
Straight Coupler 15mm 1/2 in G Female - Yes - Female 1/2in - G - Brass
RS Stock No. 468-6197
Mfr. Part No.15HSV
BrandJohn Guest
MYR85.74
Each
units
- Service Valve 15mm - - Yes - - 1/2in - BSP - Brass
RS Stock No. 840-5696
Mfr. Part No.SB0154E
BrandSharkbite
MYR316.81
Each
units
Straight Coupler 54mm - - Yes - Female - - - - Brass
RS Stock No. 712-6770
Mfr. Part No.65676
MYR65.70
Each
units
- Equal Tee 22mm - - Yes - - - - - - Brass
RS Stock No. 712-6718
Mfr. Part No.TX526S/TX467 15
MYR49.27
Each
units
- Draining Tap 15mm - - Yes - - - - - - Brass
Related Products
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
The Tectite range of remountable obtuse elbows have ...
Description:
The Tectite range of remountable obtuse elbows have been designed to withstand the rigorous demands of the mechanical services sector. Manufactured from DZR brass. Provides an electrical continuity. For use in the mechanical services sector on hot and cold services, ...
High quality Water Research Council (WRC) approved copper ...
Description:
High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are ...
Brass fittings for fluid distribution. Suitable for connecting ...
Description:
Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.