Process Pump Strainers & Inline Filters

Filters

Viewing 41 - 45 of 45 products
Results per page
Description Price Strainer or Filter Suitable Media Maximum Flow Rate Filtration Level Connection Body Material Connection Size Maximum Working Pressure Minimum Working Pressure Thread Standard or Connection Type Working Pressure Range
RS Stock No. 917-1940
Mfr. Part No.445686
MYR694.65
Each
units
Strainer Air, Oil, Water - - - Stainless Steel 1-1/4in 40 bar 27.4bar - 27.4 → 40 bar
RS Stock No. 328-4784
Mfr. Part No.C74A-10
BrandCimberio
MYR35.07
Each
units
Strainer Gas - - 3/8 in BSPT Brass 3/8in 20 bar - BSPT Maximum of 20 bar
RS Stock No. 517-353
Mfr. Part No.9933-11BQ-F1297
BrandParker
MYR1,389.10
1 Box of 10
Box(es)
Filter Gas, Liquid 170L/min - 1/4 in G Nylon 1/4in 125 psig - G Maximum of 125 psig
RS Stock No. 328-4835
Mfr. Part No.C74A-40
BrandCimberio
MYR186.84
Each
units
Strainer Gas - - 1-1/2 in BSPT Brass 1-1/2in 20 bar - BSPT Maximum of 20 bar
RS Stock No. 777-0343
Mfr. Part No.CA-RS/595015
BrandAltecnic
MYR56.00
Each
units
Strainer Liquid - 100µm 15 mm Compression Brass 15mm 16 bar 0bar Compression 0 → 16 bar
Related Products
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...
A range of disposable filters suitable for low ...
Description:
A range of disposable filters suitable for low flow gas or liquid sampling applications. The 9933-11-BQ has greater solids holding capacity and increased retention time then the 9933-05-BQ. The 8833-11-BX disposable filter unit is a continous coalescing filter with a ...
For use with Gamma/L Solenoid diaphragm dosing pumps. ...
Description:
For use with Gamma/L Solenoid diaphragm dosing pumps. Ensures entrapment of potentially damaging large debris at temperatures up to 60°C. • Maximum working pressure is 7bar• Maximum working temperature is 60°C• Filtration level is 125μm• Suitable media is water.