Ceiling Lights

A ceiling light is an electrical fitting containing a lamp or light bulb to provide an artificial light source in a room. Ensuring a workplace has adequate illumination is essential for employee health and safety. Substandard or insufficient lighting can lead to various complaints including eye-strain, headaches and fatigue. On the opposite end of the scale, too much light can also cause the same problems. Both can result in quality issues, low productivity and sometimes accidents can occur.


What ceiling light is best for me?


There are various types of ceiling fixture available, choosing the best one for an installation depends on a few key factors.


  • Natural light: Make the best use of existing natural light. Ensure that all windows and skylights are kept clean to allow as much natural light is utilised.

  • Application: Make sure that the correct type of ceiling lighting is installed for the job at hand. An office environment requires different lighting to a clothing factory containing sewing machines and fabric matching tables.

  • Positioning: Care must be taken when installing ceiling lighting. The correct positioning of lighting ensures that employees can safely carry out their daily tasks and not put themselves under any unnecessary strains.

  • Environment: Must ceiling light be Anti-corrosive or IP44 rated or above.

Whether you are installing office lighting, garage lighting, LED or fluorescent, industrial ceiling lights are the most likely. Some additional points to consider are;


Mounting type


  • Recessed or flush ceiling light: Enables the lamp to be mounted flush into the ceiling.

  • Surface mount: A simple way of fixing single or twin batten fluorescent or LED fixtures to the ceiling.

  • Pendant: A type of fitting that suspends the lamp a short distance from the ceiling.

  • Dimmable: Must the lighting be dimmable? If so extra ballasts and switching components must be used.

  • Diffusers: Used to spread and soften the light.

Colour Temperature


Colour temperature refers to a scale that measures the type of colour or hue that a lamp emits. The colour temperature scale is measured in Kelvins (K). The higher the K number the cooler the lamp. The lower the K number the warmer the lamp.


  • 2500K Extra warm white.

  • 2700K Warm white.

  • 3000K Warm white / White.

  • 3500K White.

  • 4000K Cool white.

  • 6500K Daylight.

...
Read more Read less

Filters

Viewing 81 - 100 of 242 products
Results per page
Description Price Type Length Width Depth Wattage Number of Lamps Colour Tone Lamp Type Colour Temperature Lamp Size Life Hours Colour Reference Voltage Rating Anti-corrosive
RS Stock No. 176-8579
BrandRS PRO
MYR137.50
Each
units
Twin Batten 1.2 m 82 mm 48 mm 30 W 2 Cool White LED 4000K - - 80 220 → 240 V ac -
RS Stock No. 176-8582
BrandRS PRO
MYR552.10
Each
units
LED Linear Batten 1.5 m - - 50 W 1 - LED 3000 → 6000K - - - 220 → 240 V ac -
RS Stock No. 918-1101
BrandRS PRO
MYR371.95
Each
units
Batten 1.227 m 61 mm 64 mm 30 W 1 Cool White LED 4000K T8 - - - No
RS Stock No. 188-4676
BrandRS PRO
MYR234.78
Each
units
Single Batten 1.563 m 94 mm 90 mm 58 W 1 - Fluorescent - T8 - - 230 V Yes
RS Stock No. 125-6914
BrandRS PRO
MYR428.61
Each
units
Single Batten 1.79 m 60 mm 85 mm 30 W 1 - LED - T8 - - 230 V ac -
RS Stock No. 125-6912
BrandRS PRO
MYR357.06
Each
units
Single Batten 1.525 m 60 mm 85 mm 26 W 1 - LED - T8 - - 230 V ac -
RS Stock No. 122-7975
Mfr. Part No.910500453338
MYR647.07
Each
units
Single Batten 1.223 m 87 mm 96 mm 35.5 W 1 Cool White LED 4000K - - - 240 V -
RS Stock No. 125-0627
Mfr. Part No.45218
BrandSylvania
MYR748.33
Each
units
Single Batten 1.505 m 66 mm 76 mm 39 W 1 Cool White Integrated LED 4000K T8 - - 240 V -
RS Stock No. 125-0625
Mfr. Part No.45216
BrandSylvania
MYR642.56
Each
units
Single Batten 1.205 m 66 mm 76 mm 26 W 1 Cool White Integrated LED 4000K T8 - - 240 V -
RS Stock No. 823-4854
Mfr. Part No.45333
BrandSylvania
MYR381.14
Each
units
Single Batten 1.312 m 102 mm 108 mm 36 W 1 - Fluorescent - T8 - - 230 V Yes
RS Stock No. 823-4860
Mfr. Part No.45336
BrandSylvania
MYR512.21
Each
units
Twin Batten 1.312 m 172 mm 108 mm 36 W 2 - Fluorescent - T8 - - 230 V Yes
RS Stock No. 922-1461
Mfr. Part No.NCLED36EM
MYR860.11
Each
units
Batten 1.18 m 86 mm 66 mm 36 W - Cool White LED 4000K T5, T8 - - 230 V Yes
RS Stock No. 122-7974
Mfr. Part No.910500453337
MYR889.73
Each
units
Single Batten 1.504 m 87 mm 96 mm 29 W 1 Cool White LED 4000K - - - 240 V -
RS Stock No. 820-3033
Mfr. Part No.910500453337
MYR1,287.30
Each
units
LED Module 1.504 m 87 mm 96 mm 29 W 1 Cool White LED 4000K - - - 220 → 240 V -
RS Stock No. 793-3667
Mfr. Part No.MRD255PLHF
MYR358.31
Each
units
Recessed 595 mm 595 mm 100 mm 55 W 2 - Fluorescent - - - - 230 V -
RS Stock No. 125-0611
Mfr. Part No.45177
BrandSylvania
MYR389.08
Each
units
Single Batten 605 mm 66 mm 76 mm 22 W 1 Warm White Integrated LED 3000K T8 - - 240 V -
RS Stock No. 922-1467
Mfr. Part No.NCLED36
MYR508.41
Each
units
Batten 1.18 m 86 mm 66 mm 36 W - Cool White LED 4000K T5, T8 - - 230 V Yes
RS Stock No. 823-4850
Mfr. Part No.45332
BrandSylvania
MYR365.27
Each
units
Single Batten 702 mm 102 mm 108 mm 18 W 1 - Fluorescent - T8 - - 230 V Yes
RS Stock No. 188-4158
Mfr. Part No.4058075066519
BrandLEDVANCE
MYR302.63
Each
units
Damp Proof Compact 1500 mm 35 mm 48 mm 50 W 1 Cool Daylight Fluorescent 6500K - 30000h 865 240 V -
RS Stock No. 195-0234
Mfr. Part No.4058075300743
BrandLEDVANCE
MYR195.47
Each
units
- 600 mm 77 mm 66 mm 18 W 1 Cool White Fluorescent 4000K - 50000h - 220 → 240 V -
Related Products
The introduction of this LED panel is part ...
Description:
The introduction of this LED panel is part of the Ledvance luminaire family providing greater efficiency through integrated LED lighting. The LED panel is the ideal upgrade of existing fluorescent installations. Greater energy savings and low maintenance costs with an ...
Start Waterproof, integrated LED weatherproof luminaire, with UV ...
Description:
Start Waterproof, integrated LED weatherproof luminaire, with UV stabilized flat diffuser and linear prisms designed to achieve uniform lit appearance, optimise light output and to reduce glare, stainless steel diffuser clips and fixing brackets for surface mounting. Polycarbonate housing, Polycarbonate ...
This RS Pro 2ft 20W LED NCF comes ...
Description:
This RS Pro 2ft 20W LED NCF comes in 2ft, 4ft and 5ft options. With a high lumen output they are ideal for industrial and commercial applications such as warehouses, car parks, arenas and wet areas. With an ultra durable ...
The Sylvania Hydroproof T8 electronic / switch start ...
Description:
The Sylvania Hydroproof T8 electronic / switch start range of IP67 anti-corrosive / corrosion resistant luminaires are designed for the most challenging environments and offer unequalled chemical resistance. Body made from extremely resistant glass-reinforced polyester (SMC)Flat upper surface to help ...