Crimping Dies

Crimp tool dies are designed for crimping connectors during installation and electrical work. A good example of crimping is affixing a connector to the end of a cable.


How does the crimp tool die work?


Crimping involves the use of a special connector. Each wire is placed into the connector. A crimp tool is then used to tightly squeeze the two, such that the crimping punctures the connector that holds each of the wires, allowing data to be transmitted through the connector. Crimp tool dies can be divided according to the form of crimping involved: square, trapezoidal, hexagon, wrapped up or oval. Crimping tools are sized according to the wire gauge they can accept, making the wire gauge a top consideration. Some crimp tool dies are colour coded to help you identify the proper cable size, taps and lugs that the dies are compatible with.


What is the crimp tool die used for?


Crimp tool dies are extensively used in metalworking. They are also used for securing lids on metal food cans and for rapid but lasting electrical connections.


...
Read more Read less

Filters

Viewing 1 - 20 of 325 products
Results per page
Description Price Crimp Connector Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Minimum Wire Size AWG Maximum Wire Size AWG Hex Size Terminal Insulation Coaxial Type Number of Contacts Number of Ports For Use With Series Port Colour
RS Stock No. 241-8396
BrandRS PRO
MYR199.44
Each
units
- - - - - - - - RG213, RG214 - - - - -
RS Stock No. 848-436
BrandRS PRO
MYR251.96
Each
units
- - - - - - - - RG58, RG59 - - - - -
RS Stock No. 241-4726
BrandRS PRO
MYR328.62
Each
units
Terminal 6mm² - 95mm² - - - Uninsulated - - - - - -
RS Stock No. 454-851
BrandRS PRO
MYR602.39
Each
units
Terminal - - 35mm² - - - Uninsulated - - - - D36 -
RS Stock No. 848-408
BrandRS PRO
MYR203.24
Each
units
Terminal 0.25mm² - 6mm² - - - Insulated - - - - - Blue, Red, Yellow
RS Stock No. 848-420
BrandRS PRO
MYR194.16
Each
units
Bootlace Ferrule 0.25mm² - 6mm² - - - - - - - - - -
RS Stock No. 241-4732
BrandRS PRO
MYR289.20
Each
units
Terminal 16mm² - 50mm² - - - Uninsulated - - - - - -
RS Stock No. 454-873
BrandRS PRO
MYR602.39
Each
units
Terminal - - 70mm² - - - Uninsulated - - - - D36 -
RS Stock No. 282-3502
BrandRS PRO
MYR479.44
Each
units
- - - - - - - - RG174, RG178, RG179 - - - - -
RS Stock No. 241-4748
BrandRS PRO
MYR306.84
Each
units
Terminal 120mm² - 150mm² - - - Uninsulated - - - - - -
RS Stock No. 158-8949
BrandRS PRO
MYR161.42
Each
units
Splice - - - 12AWG 10AWG - Insulated - - - - - Blue, Red, Yellow
RS Stock No. 158-8955
BrandRS PRO
MYR174.25
Each
units
- 0.7mm² - 1.5mm² - - - Insulated - - - - Souriau-Clipper -
RS Stock No. 445-908
BrandRS PRO
MYR602.39
Each
units
Terminal - - 16mm² - - - Uninsulated - - - - D36 -
RS Stock No. 454-867
BrandRS PRO
MYR433.15
Each
units
Terminal - - 50mm² - - - Uninsulated - - - - D36 -
RS Stock No. 624-1320
BrandRS PRO
MYR667.16
Each
units
Terminal 120mm² - 185mm² - - - Uninsulated - - - - - -
RS Stock No. 624-1308
BrandRS PRO
MYR209.76
Each
units
- - - - - - - - - - - - - -
RS Stock No. 445-914
BrandRS PRO
MYR602.39
Each
units
Terminal - - 25mm² - - - Uninsulated - - - - D36 -
RS Stock No. 624-1336
BrandRS PRO
MYR186.84
Each
units
Terminal 95mm² - 120mm² - - - Uninsulated - - - - - -
RS Stock No. 624-1358
BrandRS PRO
MYR255.53
Each
units
- - - - - - - - - - - - - -
RS Stock No. 445-891
BrandRS PRO
MYR512.03
Each
units
Terminal - - 10mm² - - - Uninsulated - - - - D36 -
Related Products
Easily interchangeable snap-in and snap-out dies covering a ...
Description:
Easily interchangeable snap-in and snap-out dies covering a wide range of crimp connector products. The die sets are held together in the tool in pairs.
The crimp tooling detailed on this and subsequent ...
Description:
The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for ...
Profile jaws for crimp system tool KNIPEX 97 ...
Description:
Profile jaws for crimp system tool KNIPEX 97 43 200 (stock no. 336-8084)Profile die set for module plug, 0.5 → 2.5 mm2,AWG 20-13For roll crimping conductors and insulation in one operationWith four profiles for: 0.5 → 1 mm20.5 → 1 ...
The crimp tooling detailed on this and subsequent ...
Description:
The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for ...