Non-Resettable Wire Ended Fuses

Non-resettable wire ended fuses are a type of single use circuit protection device that are can be soldered onto printed circuit boards or carriers. This category encompasses any type of single-use fuse that consist of a fuse body with two wires extended outside of the body.

How do non-resettable wire ended fuses work?

Non-resettable wire ended fuses form part of a circuit and allow an electrical current to flow through them. When a fault such as overcurrent or a short circuit is detected, the metal strip in the fuse body will melt, breaking the circuit and preventing damage. This type of fuse must be replaced after it has blown.

Types of non-resettable wire ended fuses

Non-resettable wire ended fuses differ broadly, mainly in their shape. The fuse body can be a short, fat cylinder or a longer, thinner one, and the wires may extend in parallel both from the same side of the fuse, or in opposite directions from either side of the fuse body. They also differ in their current and voltage rating, and the range of their operating temperature.


...
Read more Read less

Filters

Viewing 1 - 20 of 853 products
Results per page
Description Price Current Rating Lead Orientation Voltage Rating Fuse Speed Body Material Body Diameter Body Length Body Width Body Height Wire Length Wire Pitch Breaking Capacity at Maximum Voltage Rating Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 911-3543
BrandRS PRO
MYR1.068
Each (In a Pack of 10)
units
1.25A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 767-5165
BrandRS PRO
MYR1.05
Each (In a Pack of 10)
units
5A Radial 250V - Thermoplastic 8.35 - - 7.7mm 4.3 mm, 22 mm 5.08mm 50 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5112
BrandRS PRO
MYR1.983
Each (In a Pack of 10)
units
1A Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3556
BrandRS PRO
MYR1.437
Each (In a Pack of 10)
units
4A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 911-3565
BrandRS PRO
MYR0.935
Each (In a Pack of 10)
units
5A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 764-9576
BrandRS PRO
MYR0.939
Each (In a Pack of 10)
units
500mA Axial 250V ac FF Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3568
BrandRS PRO
MYR1.091
Each (In a Pack of 10)
units
6.3A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 611-0383
BrandRS PRO
MYR2.33
Each (In a Pack of 10)
units
500mA Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 35 A -40°C +85°C
RS Stock No. 767-5099
BrandRS PRO
MYR0.991
Each (In a Pack of 10)
units
250mA Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5096
BrandRS PRO
MYR0.991
Each (In a Pack of 10)
units
400mA Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 764-9497
BrandRS PRO
MYR1.487
Each (In a Pack of 10)
units
6.3A Axial 125V ac/dc FF Epoxy Coated 2.65mm - - 7.1mm 28mm - 300 A @ 125 V dc, 50 A @ 125 V ac -55°C +125°C
RS Stock No. 767-5033
BrandRS PRO
MYR0.587
Each (In a Pack of 10)
units
500mA Radial 250V T Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 611-0686
BrandRS PRO
MYR2.228
Each (In a Pack of 10)
units
1A Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 35 A -40°C +85°C
RS Stock No. 764-9472
BrandRS PRO
MYR0.998
Each (In a Pack of 10)
units
1.5A Axial 125V ac/dc FF Epoxy Coated 2.65mm - - 7.1mm 28mm - 300 A @ 125 V dc, 50 A @ 125 V ac -55°C +125°C
RS Stock No. 611-9346
BrandRS PRO
MYR2.108
Each (In a Pack of 10)
units
6.3A Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 50 A -40°C +85°C
RS Stock No. 611-0709
BrandRS PRO
MYR2.108
Each (In a Pack of 10)
units
315mA Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 35 A -40°C +85°C
RS Stock No. 767-5153
BrandRS PRO
MYR1.683
Each (In a Pack of 10)
units
3.15A Radial 250V - Thermoplastic 8.35 - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5106
BrandRS PRO
MYR1.555
Each (In a Pack of 10)
units
500mA Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 764-9592
BrandRS PRO
MYR0.849
Each (In a Pack of 10)
units
3.5A Axial 250V ac FF Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5109
BrandRS PRO
MYR1.422
Each (In a Pack of 10)
units
630mA Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
Related Products
Cooper Bussmann SR-5H series time-delay subminiature fuses are ...
Description:
Cooper Bussmann SR-5H series time-delay subminiature fuses are an ideal PCB fuse solution and can be used within a wide variety of applications. Internationally accepted for primary and secondary overcurrent protectionHigh inrush withstand capabilityCompatible with leaded and lead-free reflow and ...
Bussmann SS-5H series time-delay subminiature fuses are an ...
Description:
Bussmann SS-5H series time-delay subminiature fuses are an ideal PCB fuse solution and can be used within a wide variety of applications.Bussmann SS-5H series fuses protect agaianst harmful overcurrents in primary and secondary applications. Bussmann SS-5H series are suited for ...
All fuses have Thermoplaste Polyamide bodies. Miniature fuses ...
Description:
All fuses have Thermoplaste Polyamide bodies. Miniature fuses for soldering onto PCB or carriers.Fast-acting (MSF) or time-delay (MST) fuses. Low breaking capacity.
All fuses have Thermoplaste Polyamide bodies. For automatic ...
Description:
All fuses have Thermoplaste Polyamide bodies. For automatic insertion, can be directly soldered or plugged (use fuseholder stock no.110-7900).