Rack Cable Management

What is rack cable management?
Rack cable management covers a range of products used to manage and organise network cables within a server rack cabinet.

Why do you need cable management?
This range of 19” rack accessories prevents any cables from accidentally being unplugged or pulled out of servers and protects the integrity of your network. Sprawling cables can also be a trip hazard.

Organising your cables enables you to easily and quickly make changes to existing rack servers, maintain your hardware or install new hardware. You can do all of this without having to unplug anything or navigate through tangled cables.

Typical Solutions
Cable organiser
A cable organiser, sometimes referred to as a cable manager, cable carrier or cable tidy can be horizontal or vertical. They help to bundle and route cables. This provides easy access to the cables and you can easily identify cables within the bundle. Many cable tidies feature rings that cables can be fed through, helping you to keep cabling neat. The rings can be made from plastic, metal or velcro. Cable managers offer extra support to cables, preventing strain and enhancing the lifespan of your network cables.

Cable Tray
Cables can be rested on cable trays and routed around the server cabinet. These do not normally have a ring or loop like cable managers, but are often have gaps or vents that help to prevent overheating.

Cable Entry Panel
A cable entry panel sometimes called a cable entry seal or brush strip seal is an additional way of protecting your network hardware. Cables are run through the opening of the panel which prevents dust and dirt from entering the data cabinet with the cable. They contain a brush that removes contaminants and prevents contaminants from entering the server cabinet. Some feature an internal latch that cannot be opened without a key. This means that even if you use a cable entry seal, the integrity of a sealed cabinet is not compromised in any way.

Cable Management Arm
Cable management arms can be attached to the racking within your server cabinet. They provide you with enough cable slack to pull running equipment out of a 19 inch rack without the need to unplug or remove any cables. Cable management arms can help to remove the stress on cables, enhancing their lifespan. They tend to be hinged or bent to offer flexibility to be used with different racking. Some are compatible with square hole racks or round hole racks, whereas some models are suitable for both types.

...
Read more Read less

Filters

Viewing 1 - 20 of 32 products
Results per page
Description Price Type Dimensions For Use With Material Height U Number of Rings
RS Stock No. 839-0055
Mfr. Part No.854-09207 THCO1
MYR158.27
Each
units
Cable Organizer with Metal Ring - Cable Management - 1U -
RS Stock No. 249-5573
BrandRS PRO
MYR139.01
Each
units
Cable Management Panel - 19-Inch Rack - 1U 4
RS Stock No. 779-4137
Mfr. Part No.AR8429
BrandAPC
MYR221.99
Each
units
Cable Organiser 483 x 44 x 15mm InfraStruXure, ISX Racks Steel - -
RS Stock No. 839-0067
Mfr. Part No.854-09233 WMB1H
MYR223.14
Each
units
Cable Organiser Single Sided 482.6 x 76.2 x 76.2mm Cable Management Plastic 2U -
RS Stock No. 779-4099
Mfr. Part No.AR8442
BrandAPC
MYR571.01
Each
units
Cable Organiser 55 x 85 x 766mm InfraStruXure, ISX Racks Steel - -
RS Stock No. 839-0064
Mfr. Part No.THCO2
MYR206.77
Each
units
Cable Organizer with Metal Ring - Cable Management Steel 2U -
RS Stock No. 738-8685
BrandRS PRO
MYR49.03
Each
units
Cable Entry Seal 337 x 78 x 10mm 19-Inch Rack PP - -
RS Stock No. 446-920
BrandRS PRO
MYR15.20
Each
units
Cable Tidy 75 x 75 x 22mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 802-0289
BrandRS PRO
MYR120.95
Each
units
Cable Entry Panel 483 mm x 10 mm x 2 Uin 2U Rack Unit Steel 2U -
RS Stock No. 447-119
BrandRS PRO
MYR32.19
Each
units
Cable Tidy 120 x 60 x 28mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 826-2852
Mfr. Part No.5502255
BrandRittal
MYR158.00
Each
units
Cable Entry Panel 390 mm x 20 mm x 1 Uin Enclosure Type TS IT Steel 1U -
RS Stock No. 447-115
BrandRS PRO
MYR12.06
Each
units
Cable Tidy 62 x 42 x 22mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 802-0291
BrandRS PRO
MYR44.82
Each
units
Cable Entry Panel 483 mm x 9 mm x 2 Uin 2U Rack Unit Steel 2U -
RS Stock No. 136-2068
Mfr. Part No.60118458
MYR74.64
1 Box of 5
Box(es)
Cable Management Ring 55 x 42mm 19-Inch Cabinet Plastic - -
RS Stock No. 580-168
Mfr. Part No.DZCC5AD
BrandAccuride
MYR224.09
Each
units
Cable Carrier 412.5 x 63.5 x 22.4mm 2 U and Above High Unit Steel - -
RS Stock No. 738-8681
BrandRS PRO
MYR52.89
Each
units
Cable Entry Seal 337 x 78 x 10mm 19-Inch Rack PP - -
RS Stock No. 243-1866
BrandRS PRO
MYR158.50
Each
units
Cable Entry Panel - 19-Inch Panel Steel 2U -
RS Stock No. 369-0195
Mfr. Part No.DZCC11AD
BrandAccuride
MYR220.93
Each
units
Cable Carrier 425.4 x 75.5 x 34mm 2 U and Above High Unit Steel - -
RS Stock No. 826-2849
Mfr. Part No.7112000
BrandRittal
MYR34.467
Each (In a Pack of 10)
units
Cable Shunting Ring - TS IT Cabinet Carbon Steel - -
RS Stock No. 136-2064
Mfr. Part No.23130506
MYR45.95
1 Box of 4
Box(es)
Cable Management Ring 90 x 40mm 19-Inch Cabinet Plastic - -
Related Products
Manufactured from Halogen Free Nylon and finished in ...
Description:
Manufactured from Halogen Free Nylon and finished in Mid Grey.''Small'' & ''Large'' formats feature cable gate access from one end only, ,''Flexible'' formats are fully openable, with front and side cable gate access. Fit directly to 19" panel mountsSingle hole ...
The Access range offers an innovative 'Open Architecture' ...
Description:
The Access range offers an innovative 'Open Architecture' construction which removes the need for corner posts and enabling the rapid removal of all panels and doors to completely expose the open frame for unhindered installation of cables &/or equipment. Vertical ...
These cable supports are designed for neat and ...
Description:
These cable supports are designed for neat and tidy cable management onto telescopic units and subracks. RoHS compliant. Load carrying capacity 2kgExtension length 730mmRequired space in retracted state 25mm 16mm2 steel tube, zinc-platedCable mounting with cable ties.
Easy handling and tool-free assemblyQuick-release fastener including security ...
Description:
Easy handling and tool-free assemblyQuick-release fastener including security lock 3524 EInternal latch included (cannot be opened with a key)Lock with chassis, cable clamp rail may be top-mounted on the outer mounting levelSuitable for IT climate control and rack extinguishingSheet steel ...