Distribution Blocks

The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device. 


What are distribution blocks used for?

Distribution blocks are used in various industries:

  • Heating/cooling for operating heaters, cooling systems and ventilation equipment.
  • Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets. 
  • Solar, wind and turbine as the power supply to distribute energy.
  • Electrical vehicles for charging stations.
  • Electronic automation, including elevators, lifting equipment and conveyor systems.

Types of distribution blocks

The two main types of distribution block are:

  • Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.
  • Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.

...
Read more Read less

Filters

Viewing 1 - 20 of 73 products
Results per page
Description Price Number of Ways Termination Method Wire Size Housing Material IP Rating Current Rating Voltage Rating Cable CSA Length Width Height Colour Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 868-0736
BrandRS PRO
MYR142.87
Each
units
26 Screw 35 mm² PC - - - - 99mm 40mm 43mm Blue +85°C -
RS Stock No. 868-0780
BrandRS PRO
MYR29.38
Each
units
- - - PC - - 250 V - 57mm 41.5mm 38mm Black +90°C -
RS Stock No. 868-0720
BrandRS PRO
MYR97.73
Each
units
- Screw 10 → 25 (Without End Sleeve) mm², 6 → 16 (With End Sleeve) mm² PC - 100A 500 V - 87mm 50mm - - - -
RS Stock No. 441-4330
BrandRS PRO
MYR297.32
Each
units
12 Screw Down - PC - 160A 500 V 16 mm², 25 mm², 50 mm² 150mm 84mm 48mm Clear - -
RS Stock No. 100-3919
Mfr. Part No.1SNL308010R0000
BrandEntrelec
MYR68.20
Each
units
7 Screw Down 14 → 10 (End 2) AWG, 14 → 4 (End 1) AWG Polyamide IP20 80A 1 kV ac, 1.5 kV dc 2.5 → 16 (End 1) mm², 2.5 → 16 (End 2) mm² 28.4mm 50.2mm 66mm Grey +110°C -55°C
RS Stock No. 383-1582
Mfr. Part No.1SNA115409R2600
BrandEntrelec
MYR34.82
Each
units
5 Clamp 12 AWG - - 32A 800 V 4mm² 32.5mm - 53mm Grey - -
RS Stock No. 705-5537
Mfr. Part No.0 048 42
BrandLegrand
MYR54.49
Each
units
8 Screw Down - PC IP20 80A 400 V ac 1.5 → 16mm² 75mm - - Blue +40°C -5°C
RS Stock No. 100-3924
Mfr. Part No.1SNL340010R0000
BrandEntrelec
MYR363.07
Each
units
12 Screw Down 14 → 2 (End 2) AWG, 14 → 6 (End 2) AWG, 14 → 8 (End 2) AWG, 3/0 AWG → 400 Kcmil (End 1) Polyamide IP10 400A 1 kV ac, 1.5 kV dc 2.5 → 10 (End 2) mm², 2.5 → 16 (End 2) mm², 2.5 → 35 (End 2) mm², 95 → 185 (End 1) mm² 46mm 60mm 96mm Grey +110°C -55°C
RS Stock No. 383-1560
Mfr. Part No.1SNA115407R1400
BrandEntrelec
MYR21.64
Each
units
3 Clamp 12 AWG - - 32A 800 V 4mm² 20.5mm - 53mm Grey - -
RS Stock No. 383-1598
Mfr. Part No.1SNA115412R0000
BrandEntrelec
MYR67.68
Each
units
10 Clamp 12 AWG - - 32A 800 V 4mm² 62.5mm - 53mm Grey - -
RS Stock No. 383-1633
Mfr. Part No.1SNA115338R2500
BrandEntrelec
MYR196.95
Each
units
2 Clamp 6 AWG - - 200A 800 V 10-70 inputmm² 114mm - 56.7mm Grey - -
RS Stock No. 383-1576
Mfr. Part No.1SNA115408R2500
BrandEntrelec
MYR23.02
Each
units
4 Clamp 12 AWG - - 32A 800 V 4mm² 26.5mm - 53mm Grey - -
RS Stock No. 675-8929
Mfr. Part No.0 371 70
BrandLegrand
MYR15.338
Each (In a Pack of 5)
units
1 Screw Down 12 AWG Metal - 18A 800 V 2.5mm² 52.2mm 5mm 46.4mm Green, Yellow +55°C -30°C
RS Stock No. 413-2331
Mfr. Part No.1SNA179535R2300
BrandEntrelec
MYR254.26
Each
units
11 Screw Down 6 AWG, 8 AWG, 4 → 2 AWG Copper Aluminium Alloy - 125A 600 V 35 inputmm² 128mm 85mm 60mm Grey - -
RS Stock No. 277-9809
Mfr. Part No.0 048 30
BrandLegrand
MYR37.05
Each
units
4 Screw Down - PC IP20 80A 400 V ac 1.5 → 16mm² 47mm - - Green +40°C -5°C
RS Stock No. 277-9770
Mfr. Part No.0 048 54
BrandLegrand
MYR76.51
Each
units
13 Screw Down - PC IP20 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 113mm - - Black +40°C -5°C
RS Stock No. 277-9786
Mfr. Part No.0 048 44
BrandLegrand
MYR78.04
Each
units
13 Screw Down - PC IP20 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 113mm - - Blue +40°C -5°C
RS Stock No. 277-2151
Mfr. Part No.0 048 24
BrandLegrand
MYR58.35
Each
units
13 Screw Down - PC - 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 113mm - - - +40°C -5°C
RS Stock No. 138-3502
Mfr. Part No.1561670000
BrandWeidmuller
MYR55.004
Each (In a Pack of 5)
units
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 202 A, 125 (UR) A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Green +130°C -50°C
RS Stock No. 187-9902
Mfr. Part No.3270223
MYR320.46
1 Bag of 5
Bag(s)
16 Push In 26 → 14 (Solid, Flexible) AWG Polyamide - 37A 250 V 0.14 → 1.5 (Flexible) mm², 0.14 → 2.5 (Solid) mm² 63.6mm 8.3mm 54mm Blue, Grey - -
Related Products
Distribution block, Basic terminal block with supply, The ...
Description:
Distribution block, Basic terminal block with supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection, Push-in connection, number ...
Distribution block, Basic terminal block with supply, The ...
Description:
Distribution block, Basic terminal block with supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection, Push-in connection, number ...
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.
Distribution terminal blocks provide fantastic reliability and are ...
Description:
Distribution terminal blocks provide fantastic reliability and are of the highest quality available across the entire range of terminals. • Easy to handle• All models rated to various voltages• Compression clamp terminals accept cable up to 4 mm², have a ...