DIN Rail Terminal Accessories

DIN rail terminal accessories are supplementary components used together with DIN rail terminals for enhanced functionality.

Types of DIN rail terminal accessories

A range of DIN rail terminal accessories is available, including:

  • End and intermediate plates
  • Fixed bridges
  • Marker strips
  • Partition plates
  • Shield connectors
  • Test adapters
  • Jumper bars
  • Support plates
  • End sections

How do DIN rail terminal accessories work?

Each type of accessory fulfils a unique function. End plates, for example, are designed to easily snap onto the DIN rail terminal to cover the exposed parts for added safety. End plates also help to prevent the terminal from dust, water or any other substances that may compromise their functionality.

End brackets guarantee a reliable, permanent mounting on the DIN rail and prevent sliding. They are available in screw and non-screw versions.

Jumper bars are used to connect consecutive and non-consecutive terminal blocks that are within the same spacing. They consist of metal tubes which make contact with the internal connector bar in the terminal block.


...
Read more Read less

Filters

Viewing 1 - 20 of 2049 products
Results per page
Description Price Accessory Type Series For Use With Hazardous Area Certification
RS Stock No. 501-695
BrandRS PRO
MYR19.436
Each (In a Pack of 5)
units
Marker Card - DIN Rail Terminal -
RS Stock No. 763-7365
BrandRS PRO
MYR26.17
1 Bag of 5
Bag(s)
Shield Connector SAB Cable -
RS Stock No. 501-629
BrandRS PRO
MYR9.87
Each (In a Pack of 5)
units
Marker Card - DIN Rail Terminal -
RS Stock No. 501-679
BrandRS PRO
MYR17.794
Each (In a Pack of 5)
units
Marker Card - DIN Rail Terminal -
RS Stock No. 763-7369
BrandRS PRO
MYR31.44
1 Bag of 5
Bag(s)
Shield Connector SAB Cable -
RS Stock No. 282-1001
BrandRS PRO
MYR53.03
1 Bag of 5
Bag(s)
Mounting Bracket - DIN Rail -
RS Stock No. 501-689
BrandRS PRO
MYR16.056
Each (In a Pack of 5)
units
Marker Card - DIN Rail Terminal -
RS Stock No. 878-7590
BrandRS PRO
MYR6.13
Each (In a Pack of 2)
units
Marking Tag W5 Screw Clamp Terminal Block -
RS Stock No. 763-7378
BrandRS PRO
MYR221.39
1 Bag of 5
Bag(s)
Shield Connector SAB Cable -
RS Stock No. 878-7572
BrandRS PRO
MYR4.168
Each (In a Pack of 5)
units
Jumper CQV Screw Clamp Terminal Block -
RS Stock No. 878-7581
BrandRS PRO
MYR5.038
Each (In a Pack of 5)
units
Jumper CQV Screw Clamp Terminal Block -
RS Stock No. 501-623
BrandRS PRO
MYR12.342
Each (In a Pack of 5)
units
Marker Card - DIN Rail Terminal -
RS Stock No. 763-7387
BrandRS PRO
MYR60.10
1 Bag of 5
Bag(s)
Shield Connector SAB Cable -
RS Stock No. 763-7375
BrandRS PRO
MYR30.89
1 Bag of 5
Bag(s)
Shield Connector SAB Cable -
RS Stock No. 501-938
BrandRS PRO
MYR1.886
Each (In a Pack of 10)
units
End Stop - DIN Rail Terminal -
RS Stock No. 467-343
BrandRS PRO
MYR7.109
Each (In a Pack of 10)
units
Square Bracket TS DIN Rail -
RS Stock No. 815-745
BrandRS PRO
MYR1.326
Each (In a Pack of 10)
units
End Plate AP SI Terminal Block -
RS Stock No. 763-7400
BrandRS PRO
MYR53.13
Each
units
Busbar Support Ssch Shield-Connection Clip -
RS Stock No. 501-972
BrandRS PRO
MYR3.248
Each (In a Pack of 10)
units
End Stop - TS 35 DIN Rail -
RS Stock No. 763-7390
BrandRS PRO
MYR22.37
1 Bag of 5
Bag(s)
Busbar Support SH Shield-Connection Clip -
Related Products
A support rail kit for equipment mounting in ...
Description:
A support rail kit for equipment mounting in enclosures or for fixing to a flat surface. Can be built into a frame by using vertical and horizontal 90° angle brackets, available separately. Commonly used as a vertical support rail for ...
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
DIN rails and brackets are made from cold ...
Description:
DIN rails and brackets are made from cold rolled steel that is zinc coated and passivated. The coating thickness is a minimum of 8 microns. All DIN Rail meets current BS, DIN, AND CENELEC Standards,A steel, snap-on mounting bracket with ...
DIN Rail terminals have a modular design with ...
Description:
DIN Rail terminals have a modular design with a 5 mm width. The standard 'centre' terminals have a tab mating facility, with the 'end' terminals having flanges for M4 fixing (Ø 4.2 mm). Centre and end terminals can easily be ...