Connection & Termination Blocks

Termination and connection blocks, also known as terminal blocks, are a wire connector that provides a straight through connection allowing more than one circuit to connect to another circuit. Termination blocks commonly feature within light fittings to connect the mains supply to the fitting circuit.
Termination Block Types
Termination blocks are made from several different materials that provide varying levels of insulation, such as:
● Nylon
● Ceramic
● Polypropylene
● Polyamide

...
Read more Read less

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Colour Cable CSA Current Rating Height Length Maximum Operating Temperature Minimum Operating Temperature Number of Ways Termination Method Voltage Rating Width
RS Stock No. 487-9456
Mfr. Part No.ELDE.N WS 24
BrandSchmersal
MYR266.05
Each
units
White 0.5 → 2.5mm² 8A 60mm 46mm +80°C -25°C 3 Screw Down 250 V 10mm
RS Stock No. 487-9636
Mfr. Part No.ELDE.N GN 24
BrandSchmersal
MYR239.86
Each
units
Green 0.5 → 2.5mm² 8A 60mm 46mm +80°C -25°C 3 Screw Down 250 V 10mm
RS Stock No. 487-9513
Mfr. Part No.ELDE.N RT 24
BrandSchmersal
MYR239.86
Each
units
Red 0.5 → 2.5mm² 8A 60mm 46mm +80°C -25°C 3 Screw Down 250 V 10mm
Related Products
This RS Pro fused panel mount terminal block ...
Description:
This RS Pro fused panel mount terminal block features an integrated in-line fuse holder. The white housing is made from nylon with tinned brass inserts for a screwed termination. A pull-up latch enables an easy replacement of a fuse. Inline ...
Earth terminal blocks that provide reliable electrical and ...
Description:
Earth terminal blocks that provide reliable electrical and mechanical contact with the DIN Rail. • Green/yellow colour coded• Flexibility to snap onto symmetrical and asymmetrical rails• Screw clamp connection.
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
For the space- and time-saving wiring of three-conductor ...
Description:
For the space- and time-saving wiring of three-conductor initiators and actuators with a terminal width of just 3.5 mm. Despite their small width, the terminals are easy to use thanks to push-in connection, testing facility on every terminal point, and ...