UFL Connectors

A miniature RS coaxial connector, the UFL connector is ideal when space saving is a concern. With this in mind, UFL connectors are often used on printed circuit boards, placed inside electronic devices that need a radio frequency connection. UFL connectors are commonly used to connect a WiFi antenna to a laptop’s internal circuitry.
UFL are not suitable for similar usage as other RF connectors, as they are not designed for reconnection. Constant plugging and unplugging of a UFL connector will likely damage it. To this end, they are often used in applications where disconnections are un-necessary.
The RS range of UFL connectors is available as ready to solder, or supplied as pre-wired for quick and convenient connections.

...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Mounting Type Size Body Plating Cable Type Operating Temperature Range Mating Type Operating Frequency Contact Plating Body Orientation Contact Material Gender Impedance Termination Method
RS Stock No. 166-4891
Mfr. Part No.U.FL-R-SMT-1(10)
BrandHirose
MYR5,729.40
1 Reel of 2500
Reel(s)
Surface Mount Standard Silver Plated - -40 → +90 °C - 6GHz Gold Plated Straight Brass Female 50Ω Solder
RS Stock No. 557-981
Mfr. Part No.U.FL-R-SMT-1(10)
BrandHirose
MYR4.626
Each (In a Pack of 5)
units
Surface Mount - Silver - - - 0 → 6GHz Gold Straight Brass Female 50Ω Solder
RS Stock No. 125-0330
Mfr. Part No.R302302000
BrandRadiall
MYR3.56
Each
units
PCB Mount Miniature Gold Coaxial - Snap On 0 → 6GHz Gold Straight Brass Female 50Ω Solder
RS Stock No. 144-0895
Mfr. Part No.A-1JB
BrandAmphenol
MYR3.146
Each (On a Reel of 10)
units
Surface Mount Standard Silver Micro Coaxial -40 → +90 °C Push-On 6GHz Gold Straight Brass Female 50Ω Solder
RS Stock No. 143-9687
Mfr. Part No.A-1JB
BrandAmphenol
MYR3,938.47
1 Tape of 2500
Tape(s)
Surface Mount Standard Silver Micro Coaxial -40 → +90 °C Push-On 6GHz Gold Straight Brass Female 50Ω Solder
Related Products
Hubner + Suhner MBX cable connectors are for ...
Description:
Hubner + Suhner MBX cable connectors are for applications requiring cable to board interfacing, durable MBX cable connectors with around 100 mating cycles and low engagement force. Frequency DC - 6 GHz50Ω impedanceWorking voltage 250 Vrms - 50 Hz.
Cinch Connectivity range of 50 ohm MCX series ...
Description:
Cinch Connectivity range of 50 ohm MCX series RF coaxial SMT jacks and plugs have a snap-on interface eliminating the need for a threaded connection and are 30% smaller than traditional snap-On SMB connectors. Typical applications for these MCX series ...
From Samtec, a series of ganged micro-mini MMCX ...
Description:
From Samtec, a series of ganged micro-mini MMCX PCB mount plugs. The 50ohm micro-miniature connectors are typically used in communication applications from DC to 6 GHz. Ideal for use where board space is restricted. They feature a Snaplock design allowing ...
HUBER+SUHMNER MMCX connectors are designed to be used ...
Description:
HUBER+SUHMNER MMCX connectors are designed to be used where the smallest possible dimensions have to be achieved. The reliable 'snap-on' coupling mechanism ensures the electrical parameters are consistently reproduced. The SMT connectors are suitable to all reflow-soldered SMT PCBs where ...