Automotive Connector Terminals

Automotive connector terminals are standardised wire connectors made to provide a quick and simple connection point for one or more wires together to create robust and functional cable solutions. Different securing methods can be used for specific applications and across different industries. Quick latch connections for terminals that may need frequent maintenance or are often connected and disconnected or screw down terminals for a more long-term and robust application whilst still allowing flexibility in their use and reliability every time.


Electrical connectors used in applications such as cars, motorcycles and motorhomes have to be durable and reliable as they are most commonly used in parts of a vehicle that are exposed to the elements and excessive wear. Typically, automotive connector terminals are very well sealed against dust ingress and moisture, and usually have a high degree of heat resistance. Due to the excessive vibration of being installed in a vehicle, these connectors will often have secure locking systems built into the plug and socket to prevent unwanted disconnect.


Termination Types


Terminal blocks may use a variety of methods to achieve a robust and reliable wire connection.


Spring clamps


Spring clamp connections simply use the pressure of a spring to press down and retain the wire in place. Spring clamps are useful in applications using small wire diameters without the need for high strength connections as well as for use in a limited working space where screwing terminals down may be difficult.


Screw clamps


Similar to a spring clamp, use pressure to hold a wire in place but can achieve greater clamping pressure with the use of a screw to tighten the clamp over the wire. This method of electrical connection is the most classic and industry-standard termination method. This type can accommodate a very wide range of wire sizes and provides a reliable connection.


Insulation displacement connections (IDC) are a simple and easy connection method that is achieved by pushing the wire between two sharp pieces of metal, that can break the outer sheathing to allowing a connection to be made without exposing any bare wire.


Applications


Automotive connector terminals come in both pre-insulated and non-insulated forms and are suitable for use in a wide range of both commercial and industrial applications. Whether its connecting a fuse, a battery terminal or even a vehicle sensor, our range of terminals allow for easy often modular applications at a range of voltages both high and low. Terminal kits can be a great way to ensure you have a range of terminal sizes suitable for almost any situation big or small.


...
Read more Read less

Filters

Viewing 1 - 20 of 407 products
Results per page
Description Price Type Series Gender Pitch Contact Plating Contact Material Depth Colour Number of Contacts Diameter Corded Current Rating Mounting Type Termination Method
RS Stock No. 801-1099
Mfr. Part No.12124076
BrandDelphi
MYR1.592
Each (In a Pack of 100)
units
- Metri-Pack 150.2 Female - - - - - - - - - - -
RS Stock No. 923-2259
Mfr. Part No.12124076
BrandDelphi
MYR0.801
Each (On a Reel of 3500)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 712-1659
Mfr. Part No.170429-1
MYR0.666
Each (In a Pack of 20)
units
- EI Male - - - - - - - - - - -
RS Stock No. 801-0957
Mfr. Part No.12048074
BrandDelphi
MYR1.677
Each (In a Pack of 100)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 923-2161
Mfr. Part No.12048074
BrandDelphi
MYR0.972
Each (On a Reel of 3000)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 136-1734
Mfr. Part No.183035-1
MYR0.941
Each (In a Bag of 5000)
units
- SuperSeal 1.5 Female - - - - - - - - - - -
RS Stock No. 723-9371
Mfr. Part No.64322-1029
BrandMolex
MYR0.992
Each (In a Pack of 100)
units
- CP - - - - - - - - - - - -
RS Stock No. 896-1827
Mfr. Part No.15344729
BrandDelphi
MYR2.254
Each (In a Pack of 50)
units
- HVF280 Female - - - - - - - - - - -
RS Stock No. 923-2256
Mfr. Part No.12124075
BrandDelphi
MYR0.841
Each (On a Reel of 3500)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 680-9705
Mfr. Part No.3-1447221-4
MYR3.164
Each (In a Pack of 5)
units
- Superseal Female - - - - - - - - - - -
RS Stock No. 801-1095
Mfr. Part No.12124075
BrandDelphi
MYR2.193
Each (In a Pack of 100)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 690-9887
Mfr. Part No.IL-AG5-C1-7500
BrandJAE
MYR0.656
Each (In a Pack of 50)
units
- IL-AG5 Female - - - - - - - - - - -
RS Stock No. 801-1089
Mfr. Part No.12129497
BrandDelphi
MYR2.975
Each (In a Pack of 100)
units
- Metri-Pack 280 Male - - - - - - - - - - -
RS Stock No. 125-0252
Mfr. Part No.13881788
BrandDelphi
MYR0.643
Each (In a Pack of 100)
units
- Micro OCS 1.2 - - - - - - - - - - - -
RS Stock No. 164-0680
Mfr. Part No.172778-1
MYR1.78
Each (In a Bag of 1000)
units
- MIC Male - - - - - - - - - - -
RS Stock No. 896-1802
Mfr. Part No.12033997
BrandDelphi
MYR2.284
Each (In a Pack of 50)
units
- Metri-Pack 630 Female - - - - - - - - - - -
RS Stock No. 712-2110
Mfr. Part No.172778-1
MYR2.111
Each (In a Pack of 50)
units
- MIC Male - - - - - - - - - - -
RS Stock No. 801-1092
Mfr. Part No.12124977
BrandDelphi
MYR0.833
Each (In a Pack of 100)
units
- Metri-Pack 280 Male - - - - - - - - - - -
RS Stock No. 923-2237
Mfr. Part No.12077411
BrandDelphi
MYR0.591
Each (On a Reel of 2300)
units
- Metri-Pack 280 Female - - - - - - - - - - -
RS Stock No. 801-1083
Mfr. Part No.12048159
BrandDelphi
MYR1.636
Each (In a Pack of 100)
units
- Metri-Pack 280 Male - - - - - - - - - - -