Phoenix Contact MUT 4-PE Series Green/Yellow Earth Terminal Block, 4mm², Single-Level, Screw Termination
- RS Stock No.:
- 815-8857
- Mfr. Part No.:
- 3248037
- Manufacturer:
- Phoenix Contact
70 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each (In a Pack of 5)
MYR24.358
Units | Per Unit | Per Pack* |
5 + | MYR24.358 | MYR121.79 |
*price indicative |
- RS Stock No.:
- 815-8857
- Mfr. Part No.:
- 3248037
- Manufacturer:
- Phoenix Contact
Legislation and Compliance
Product Details
Phoenix Contact Earth Terminal Block, 9mm Stripping Length, M3 Screw Thread - MUT 4-PE - 3248037
Prevent injury caused by dangerous electrical equipment with this earth terminal block from Phoenix Contact. By threading your system's earthing cables into its two connection points, you can redirect a fault current to the ground and cut out the risk of being shocked. Thanks to its nominal voltage rating of 500V, this terminal block is safe to use in high-power applications.
A broad operating temperature range between -60°C and +110°C means this is a reliable option for use in harsh settings. Its low net weight of ±7g means it adds minimal strain to your system. Terminal blocks like this one offer essential protection everywhere from distribution boards to control centres and power stations.
A broad operating temperature range between -60°C and +110°C means this is a reliable option for use in harsh settings. Its low net weight of ±7g means it adds minimal strain to your system. Terminal blocks like this one offer essential protection everywhere from distribution boards to control centres and power stations.
Features & Benefits
• DIN rail mounting type for quick and simple setup
• Voltage tested up to 6kV for protection against electrical surges
• Polyamide insulation resists wear and chemical damage so you can use the block in heavy-duty applications
• Wide operating humidity range between 30% and 70% means it functions in steamy spots
• DIN EN 50155 (VDE 0115-200):2008-03 compliance assures you that it meets the European standard for electronic equipment mounted on rail vehicles
• Voltage tested up to 6kV for protection against electrical surges
• Polyamide insulation resists wear and chemical damage so you can use the block in heavy-duty applications
• Wide operating humidity range between 30% and 70% means it functions in steamy spots
• DIN EN 50155 (VDE 0115-200):2008-03 compliance assures you that it meets the European standard for electronic equipment mounted on rail vehicles
MUT Mini Series
Specifications
Attribute | Value |
---|---|
Colour | Green/Yellow |
Number of Levels | Single |
Series | MUT 4-PE |
American Wire Gauge | 24 → 10AWG |
Termination Method | Screw |
Cable CSA | 4mm² |
Voltage Rating | 500 V |
Minimum Operating Temperature | -60°C |
Maximum Operating Temperature | +110°C |
Standards Met | CSA, cULus, EAC, REACH |
Model Number | MUT 4-PE |