- RS Stock No.:
- 898-6804
- Mfr. Part No.:
- TA167
- Manufacturer:
- Pico Technology
2 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
33 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
Was MYR1,453.23
You pay
MYR1,380.57
Units | Per Unit |
1 + | MYR1,380.57 |
- RS Stock No.:
- 898-6804
- Mfr. Part No.:
- TA167
- Manufacturer:
- Pico Technology
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
TA167 Pico Technology AC/DC Current Probe
The Pico Technology TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000A. It has a 2m long coax terminated cable with safety BNC connector. This current clamp allows you to measure up to 2000A without cutting, disconnecting, or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your Pico scope.
Features and Benefits
200A mode for better performance at lower currents
Auto power-down facility to save battery life
Additional screening to reduce noise pickup
Advanced Hall Effect sensors for improved sensitivity
High external field rejection
Power supply is 9V alkaline battery
Bandwidth is 20KHz
Current 2000A
Maximum conductor size 32mm
9V Alkaline battery
Auto power-down facility to save battery life
Additional screening to reduce noise pickup
Advanced Hall Effect sensors for improved sensitivity
High external field rejection
Power supply is 9V alkaline battery
Bandwidth is 20KHz
Current 2000A
Maximum conductor size 32mm
9V Alkaline battery
Applications
Oscilloscope probes are used with oscilloscopes to enable the signals on the circuits being tested to be connected to the oscilloscope so that signals can be measured. These oscilloscope probes can be found in:
Battery testing with Pico diagnostics software
Relative compression testing
Starter motor testing
Alternator output testing
Hybrid and EV electric motor current
Battery testing with Pico diagnostics software
Relative compression testing
Starter motor testing
Alternator output testing
Hybrid and EV electric motor current
Certifications
EN61010-1:2001
EN61010-2-032:2002
EN61010-031:2002
300V CAT III
Pollution degree 2
EN61010-2-032:2002
EN61010-031:2002
300V CAT III
Pollution degree 2
Specifications
Attribute | Value |
---|---|
Probe Type | AC/DC Current |
Bandwidth | 20kHz |
Connector Type | BNC |
Model Number p | TA167 |
Number of Probes | 1 |
Safety Category Level | CAT III |
Safety Category Voltage | 300V |
Current | 2000A |
Safety Category | CAT III 300V |