- RS Stock No.:
- 462-6038
- Mfr. Part No.:
- TPA3001D1PWP
- Manufacturer:
- Texas Instruments
59 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
999940 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR52.39
Units | Per Unit |
1 - 14 | MYR52.39 |
15 - 29 | MYR50.80 |
30 + | MYR43.70 |
- RS Stock No.:
- 462-6038
- Mfr. Part No.:
- TPA3001D1PWP
- Manufacturer:
- Texas Instruments
Technical data sheets
Legislation and Compliance
Product Details
Audio Power Amplifiers, Class-D, Texas Instruments
A range of highly integrated Class-D Audio Power Amplifier ICs from Texas Instruments providing high efficiency and compact dimensions. The devices are suitable for a wide variety of uses including stereo audio equipment, automotive applications, television, PDA, computer and mobile applications.
The Texas Instruments TPA3001D1 is a 20-W monaural bridge-tied load (BTL) class-D audio power amplifier (class-D amp) with high efficiency, eliminating the need for heat sinks. The device can drive 4- or 8- speakers with only a ferrite bead filter required to reduce EMI. The gain of the amplifier is controlled by two input terminals, GAIN1 and GAIN0. This allows the amplifier to be configured for a gain of 12, 18, 23.6, or 36 dB. The differential input stage provides high common-mode rejection and improved power-supply rejection.
20 W Into 8- Load From 18-V Supply (10% THD+N)
Short-Circuit Protection (Short to VCC, Short to GND,
Short Between Outputs)
Third-Generation Modulation Technique:
Replaces Large LC Filter With Small, Low-Cost Ferrite
Bead Filter in Most Applications
Improved Efficiency
Improved SNR
Low Supply Current: 8 mA Typ at 12 V
Shutdown Control: < 1 μA Typ
Space-Saving, Thermally-Enhanced Power PAD™ Packaging
Short-Circuit Protection (Short to VCC, Short to GND,
Short Between Outputs)
Third-Generation Modulation Technique:
Replaces Large LC Filter With Small, Low-Cost Ferrite
Bead Filter in Most Applications
Improved Efficiency
Improved SNR
Low Supply Current: 8 mA Typ at 12 V
Shutdown Control: < 1 μA Typ
Space-Saving, Thermally-Enhanced Power PAD™ Packaging
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Audio Amplifiers, Texas Instruments
Specifications
Attribute | Value |
---|---|
Amplifier Type | Audio Power Amplifier |
Output Type | 1 Channel Mono |
Maximum Power | 12 W, 20W |
Application | Speaker |
Amplifier Class | Class D |
Mounting Type | Surface Mount |
Typical Single Supply Voltage | 9 V, 12 V, 15 V |
Power Supply Type | Single |
Package Type | HTSSOP |
Pin Count | 24 |
Input Signal Type | Differential |
Output Signal Type | Differential |
Minimum Operating Temperature | -40 °C |
Dimensions | 7.8 x 4.4 x 1.15mm |
Maximum Operating Temperature | +85 °C |