Digi International Xbee ZigBee Module, +3dBm, ADC, API, CMOS, DIO, UART, USB Pan, RS232, RS485

Stock information currently inaccessible
RS Stock No.:
771-6349
Mfr. Part No.:
XB24-Z7PIT-004
Manufacturer:
Digi International
Find similar products by selecting one or more attributes.
Select all

Brand

Digi International

Maximum Output Power

+3dBm

Receiver Sensitivity

-96dBm

Supported Bus Interfaces

ADC, API, CMOS, DIO, UART, USB

Protocol Type

Xbee

Supported Network Interfaces

Pan, RS232, RS485

Supply Voltage

2.1 → 3.6V

Dimensions

27.61 x 24.38 x 2.79mm

Height

2.79mm

Length

24.38mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

27.61mm

COO (Country of Origin):
US

XBee ZB ZigBee RF Module


The XBee ZB ZigBee RF module operates in the 2.4GHz ISM Band and allows the formation of a mesh network. With its high receiver sensitivity it can provide line-of-sight communication for up to 120m.

Carrier frequency: 2.4GHz ISM band with 16 channels
RF Power Output: +3dBm (Boost mode)
Receiver Sensitivity: -96dBm (Boost mode) @ 1% PER
Interference control: Direct Sequence Spread Spectrum (DSSS), Packet Retry/Acknowledgement
OTA Date Rate: up to 250kbps
Host communication: serial UART with RTS/CTS flow control
Supported network topologies: Point-to-Point, Point-to-Multipoint, Peer-to-Peer & Mesh
Self-routing, self-healing and fault-tolerant mesh networking
AES-128 encryption
Antenna: Whip ( RS 667-3005), External via U.FL (RS 667-3001), PCB (RS 771-6349), RPSMA (RS 667-3008)
4 channel 10-bit ADC
16 x GPIO pins
Power supply: +2.1V to +3.6Vdc
Operating temperature range: -40 to +85°C
Dimensions: 24.4 x 27.6 x 3mm SMT
Applications: Wireless sensor networks, communication for the Internet of Things (IoT)

Note

ZB and ZNet 2.5 firmware are similar in nature, but not over-the-air compatible. Devices running ZNet 2.5 firmware cannot communicate with devices running ZB firmware.

Approvals

FCC, IC, ETSI, C-TICK, Japan